Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Marlin 1895CB (45/70)

Discussion in 'Gunsmithing and Repairs' started by PKGunsmithing, Dec 2, 2007.

Thread Status:
Not open for further replies.
  1. PKGunsmithing

    PKGunsmithing Member

    Joined:
    Jul 10, 2007
    Messages:
    2
    Location:
    Florida
    A customer has brought me a Marlin 1895CB that will not feed properly but also will not eject. Before I spend a few weeks troubleshooting, can anyone recommend a reputable site for good technical info? Logic tells me it is a timing issue. This is a new gun with a only a few rounds through it.

    Paul Koester--
     
  2. rcmodel

    rcmodel Member in memoriam

    Joined:
    Sep 17, 2007
    Messages:
    59,082
    Location:
    Eastern KS
    If it's a "new gun with only a few rounds through it", it is still under Factory Warrentee.

    Send it back to Marlin and let them fix it free.

    1224.jpg
    rcmodel
     
  3. gb6491

    gb6491 Member

    Joined:
    Apr 17, 2006
    Messages:
    1,707
    Location:
    Yuma County, Arizona
    I'd check the ejector to see if it's installed properly. The customer may have taken the bolt out and not got it and the ejector aligned properly when doing reassembly. Here's a link to the manual in PFD form: http://www.marlinfirearms.com/pdfs/manuals/MFC_Centerfire.pdf
    It shows the correct relationship of the two.
    Regards,
    Greg
     
Thread Status:
Not open for further replies.

Share This Page