Marlin 336 peep sights

Status
Not open for further replies.
The Marlin doesn't have a square post. It has a bead. IMO the fast and natural way to aim is to center the bead and the target in the peep aperture.

You may well be right............but I've shot so long that way, that is is natural and intuitive for me.

I would agree that a .30-30 is pretty well spent at 150 yards. But as a younger man I didn't know that, and killed a few at 200 yards. It's kind of a moot point now since I wouldn't feel comfortable taking that far of a shot without a scope.
 
Of course, another solution is a custom front sight.

There are some posts that would work very well, I think, to provide very natural centering of the front sight in the aperture, while allowing a POA like you describe (which is the most accurate way to shoot).

Ever seen KNS Precision's AR sight posts? Lots of possibilities, including crosshairs. I wonder if there'd be a way to fit one of those to a Marlin.

http://www.knsprecisioninc.com/c/GunSights.html
 
Anything is possible.............if you are willing to make the effort.

In my case I use a Williams fire sight in front of a Lyman receiver sight. This set up works well for me.................and the truth be told, I may be entering a phase of my life where I don't change too many things. :D
 
I use the Williams FP peep with a Williams FireSight front. This combo works for me.
If you have a new production "W" model and go with the XS system, be aware that the "W" front ramp is secured by one screw (there is no screw under the dovetail) and the XS front requires two screws.
 
[ am trying to decide betwees the XS ghost ring, Skinner sight, and the Williams FP or WGRS (if it doesn't hang over the back of the receiver on a 336 like it does on the 1894 - still cant find an answer to that).]

The WGRS does not overhang the rear/hammer of a Model 336.


[I am leaning toward the XS because its not as bulky as some of the others but I like how I can use multiple apertures for the other sights while the XS only comes with 2, and they are larger than most of the other offerings - will that affect accuracy?


1) Upon request, the XS Ghost Ring peep is available with an aperture stem that's threaded to take removeable apertures, just like any other peep sight.

2) Aperture size effects both accuracy and speed/handiness, but in opposite directions:

The smaller the aperture, the tighter the accuracy but the slower to acquire/use on sudden/game shots.
The larger the aperture, the looser the accuracy (only slightly) but the speed of acquisition increases dramatically.

Many seasoned users, in fact, zero/practice with a small aperture, then entirely remove it and shoot/hunt using the resultant ghost ring.



[The Williams FP is pretty bulky and not my favorite in the looks dept but do seem very functional

You might also want to consider the Williams 5D - which is similar to the FP, but at half the $$$$, due to no micrometer adjustable w/e.

The 5D, XS and Skinner are all "set 'n forget" sights, best used by a one-load shooter - since they're not readily re-adjustable for repeated changes in the field or in a target game like silly-wets.
The FP is better for frequent changes in zero.

ALL the top-mount peeps will require a commensurately higher than issue front sight blade, since they each raise the issue line-of-sight by at least 1/10".
Many take the opportunity to change front sight type to a different material they like better, beit gold bead/ivory bead/ fiber optic bead.

.
 
I think I am getting somewhere now. I definately think 150 yards is the max range that I am comfortable hunting with and I plan on using one load and sticking to it, thus negating the upside to the Lyman or Williams FP sight.

So I guess now I am down to the WGRS, XS, and Skinner sights. Still have some deciding to do. Thanks for all the input so far, I know a lot more about these sights now.
 
I have the XS, Lymann 66, and a Skinner. I like them all. I bought the Lymann's because I though I would do a lot of adjusting, but it did not happen. I am with Armed Bear on this one. I found a sweet spot for each rifle that let me shoot out to about 150, I set the sight and did not move it. I generally prefer the XS, but the Skinners are very nice. I put one on my Marlin 39 and it looks great and is dead on. I would go with the simpler designs and not worry about all the others.

XS and Skinner are steel or brass, the other are aluminum. I would stick with the stouter ones as I am pretty hard on my guns.

Good Luck in your choice,

Matt
 
I think I will try the XS sight as I think it will fit my needs best. Thanks to this thread I have learned that I can special order smaller apertures if needed which was my main negative for this sight. It might turn out I like the ghost ring better anyway, thats what I have on my mini and m1a and l have zero complaints. Thanks for all the help - much appreciated.
 
So if you have a Marlin 336 W model with only 1 screw at the front side ramp, how do you install the XS front sight that has 2 screws?
 
Dakota - I may have read that XS makes a front sight with 1 screw for the 336W, could be wrong about that though, I would call them to find out. Or a gunsmith or someone handy with a drill and tap set could probably install it.

If neither of those work for you, maybe one of the other brands in this thread would work best for the 336W. Someone correct me if I'm wrong but I think the firesight and the Skinner front sight would not have any problems as they are dovetailed to fit your front sight mount.
 
I have the WGRS on my guide gun (45/70) and it doesn't hang over the rear. With my handloads I haven't had to change out the front sight for a taller one. A couple of my friends bought the same sight and one of them put it on the front scope holes as he said that it works better for him. I haven' t seen the setup yet but hope to in the very near future.
 
Status
Not open for further replies.
Back
Top