TT
member
Does anyone know if a Kel Tec 10 round 9mm mag (for the P11) will run in a Marlin Camp 9?
Thanks.
Thanks.
Marlin Camp 9 + Kel Tec mag?
- Thread starter TT
- Start date
- Status
BillinNH
Member
No, it's too short to seat properly. Some people have cut about a half inch off the Marlin magwell to allow it to fit but I decided I wouldn't do that to mine unless I head an extra magwell. Want to keep it original.
Use the S&W 69 series 12 rounders which are identical to the Marlin original mag. I use 15, 20 and 30 round S&W 59 clones in my Marlin as well as my KT sub 2000.
Bill
Use the S&W 69 series 12 rounders which are identical to the Marlin original mag. I use 15, 20 and 30 round S&W 59 clones in my Marlin as well as my KT sub 2000.
Bill
TT
member
That's what I was afraid of. Thanks for the info.
12 rounders are not an option- I live in Bright Blue California.
12 rounders are not an option- I live in Bright Blue California.
BillinNH
Member
< I live in Cal.>
Ah, too bad, that must be infuriating.
Here's an idea: for a while KT sold the sub2K with a mag that that was as long as a 15 rounder (to fit the KT magwell) but was buggered up to only hold 10 rounds. Ugly looking thing. In fact, they may still sell that, check their website. Anyway, it is 10 round legal and will fit the Marlin magwell but will stick out a bit at the bottom.
Or you could vote your stupid politicians out of office. Or move to NH where people aren't paranoid about firearms. Good luck with it.
Bill
Ah, too bad, that must be infuriating.
Here's an idea: for a while KT sold the sub2K with a mag that that was as long as a 15 rounder (to fit the KT magwell) but was buggered up to only hold 10 rounds. Ugly looking thing. In fact, they may still sell that, check their website. Anyway, it is 10 round legal and will fit the Marlin magwell but will stick out a bit at the bottom.
Or you could vote your stupid politicians out of office. Or move to NH where people aren't paranoid about firearms. Good luck with it.
Bill
TT
member
Boy, you said it.
blitzer0101
Member
The Kel-Tec 10 round Sub2000 magazines work, had all three guns at one point. But the 10 round Sub2000 magazine wouldn't seat in the P-11?
Shear_stress
Member
- Joined
- Apr 27, 2005
- Messages
- 2,728
Doesn't the Camp9 just take regular old S&W 59- series mags? I don't think there's any shortage of those with a ten round capacity.
Here you go:
http://www.gunclips.net/smwe59se10gu.html
Here you go:
http://www.gunclips.net/smwe59se10gu.html
TT
member
Quite right, but I was asking because I just acquired a P11 and I was interested in the idea of having a carbine that used the same mags. 59/X59/59XX and 69/X69/69XX mags would protrude out of the P11, and therefore don’t really interest me.
Thank you though.
Thank you though.
Shear_stress
Member
- Joined
- Apr 27, 2005
- Messages
- 2,728
Good deal. Kel-tecs aren't too easy to find in California.
TT
member
It emigrated from Texas.
ugaarguy
Member
- Joined
- Mar 19, 2006
- Messages
- 13,828
Kel-Tec offers grip extensions, so that may be a solution. http://www.kel-tec-cnc.com/cart/ind...Path=2&zenid=519d9ee9aa5513d33035149fc60cab9e
jjohnson
Member
Hey... as long as we're doing camp9's today....
I have one disassembled (won't work). The trigger group assembly, when removed, won't release the hammer past the locked position of about 50 degrees from horizontal, like the safety is stuck. Is that normal? When I reassembled it (I was working on a locked bolt) I noticed that the trigger doesn't seem to work either. Could one of you guys tell me if the trigger should release the hammer on a "removed" trigger group? I really don't want to take it apart further, but will if I need to.
Sorry this is a bit off topic, but I hope I'm in the company of friends here...
I have one disassembled (won't work). The trigger group assembly, when removed, won't release the hammer past the locked position of about 50 degrees from horizontal, like the safety is stuck. Is that normal? When I reassembled it (I was working on a locked bolt) I noticed that the trigger doesn't seem to work either. Could one of you guys tell me if the trigger should release the hammer on a "removed" trigger group? I really don't want to take it apart further, but will if I need to.
Sorry this is a bit off topic, but I hope I'm in the company of friends here...
Hutch
Member
JJ, post this in the gunsmithing section, it'll get better attention. I can't envision what you're describing, but you do recall that the Marlins had a "magazine safety", don'tcha? Could that be a factor here?
- Status
