MBC #9 Cone nose 125gr 9mm?

[Rule3]

Anyone shooting this bullet? I have been using the 124 gr Small Ball, but it has to be seated so short. It shoots well but wanted to try something else,

Is it accurate ?(considering all things that can be, equal)

Lead or Coated same bullet

http://missouribullet.com/details.php?prodId=237&category=5&secondary=8&keywords=

 

[kcofohio]

I have shot the non-coated Cones with good results. I did receive a box of the coated in my last order from MBC. Haven't tried them out yet.

I had settled on a COAL of 1.125". Not sure where I came up with that length, but they have cycled well through 3 different handguns.

Accuracy seemed on par with Berry's 124 gr. RN.

 

[CZ9shooter]

I used to use a lot of those. They worked as well as any other cast 9mm bullet for me. I switched to another brand just because I wanted to try coated bullets. This was a couple of years before Missouri offered their HiTek line. If my current source were to dry up I would surely use the cones again, but coated this time.

 

[Dudedog]

opps see below

 

[Dudedog]

I have shot a lot of them both uncoated (before MBC offered coating) and coated. All shot well. I seated the cones to 1.10.
I also like MBCs 9mm SWC. One pistol preferred the cones the other 2 seemed to like the SWCs a bit better.

Give them a try I think you will like them.

I have also had excellent results with the RMR 124gr 9mm hardcore match flat nose.
http://www.shop.rmrbullets.com/9mm-...828E863F733772340D819806B7D355.m1plqscsfapp06

Both companies offer THR members a 5% discount with the code.