Sniper X
Member
Anyone know of a place for the moon clips and belt holders for the ones that work with the 25-2? Might be picking up an old super tricked out comp gun.,.......
moon clips for a 25-2...where to get
- Thread starter Sniper X
- Start date
- Status
oneounceload
member
Sniper X
Member
Thanks I saw those and will get some of the holders too...thanks again!
Starter52
Member
I'd recommend you get an unloading tool to go with the moon clips. Those little tools are well worth the price.
rcmodel
Member in memoriam
Get some Rimz Ez-Moon clips for range use and you don't need no Steenk'n tools.
http://www.ezmoonclip.com/page_4.htm
rc
http://www.ezmoonclip.com/page_4.htm
rc
CSA 357
Member
old sarge has the moon clips for 30 bucks a 100 they work fine
jmorris
Member
- Joined
- Sep 30, 2005
- Messages
- 24,392
http://www.ranchproducts.com/ Last time I ordered 100 cost around $20 and they are steel.
Click on this photo for a video of a mooner i built. The feed tube (or any tube can be) notched to de moon.
If you reload using 45 gap brass, you don't need tools to moon/demoon with steel moon clips and the small primers allow for lighter DA triggger pulls.
Click on this photo for a video of a mooner i built. The feed tube (or any tube can be) notched to de moon.
If you reload using 45 gap brass, you don't need tools to moon/demoon with steel moon clips and the small primers allow for lighter DA triggger pulls.
David E
Member
- Joined
- Aug 3, 2008
- Messages
- 7,459
www.moonclips.com has anything and everything you'll need for moonclip guns.
BlindJustice
Member
Wilson Combat sells em but they're pricey with the nickel wash
but the WC de-mooner is only $3
FYI - the SMith & Wesson revolvers in .45 ACP
also chamber and shoot the .45 Auto Rim - Peters Ammo
created the rimmed .45 AR in 1921 - you can use
the HKS 25M speedloader for .45 AR.
belt holder for full moon clips. I think the only guy
I found that made them cordura dyed to match my cordura
belt and holster was/is Rosen or del fatti - probably others
make them in natural or black.
Try googling Fullmoon belt holders
R-
but the WC de-mooner is only $3
FYI - the SMith & Wesson revolvers in .45 ACP
also chamber and shoot the .45 Auto Rim - Peters Ammo
created the rimmed .45 AR in 1921 - you can use
the HKS 25M speedloader for .45 AR.
belt holder for full moon clips. I think the only guy
I found that made them cordura dyed to match my cordura
belt and holster was/is Rosen or del fatti - probably others
make them in natural or black.
Try googling Fullmoon belt holders
R-
aryfrosty
Member
Moon clips
Another source is Dillon. I just bought a potload and the newer style de/re-mooner from them. They also have the spring steel belt clips. I also just received my Sam Andrews Leather Monarch shoulder holster for my 2.5" 325NG. It has an off-side ammo holder that holds extra loads already clipped up. I got mine to hold 4 extra moon clips and rounds but Mr. Andrews will make the ammo holder to hold however many you want.
I noticed that one poster was speaking about using .45GAP brass for reloading...Can anyone advise as to whether the S&W revolvers in .45acp can tolerate the .45GAP factory ammo? Thanks.
Another source is Dillon. I just bought a potload and the newer style de/re-mooner from them. They also have the spring steel belt clips. I also just received my Sam Andrews Leather Monarch shoulder holster for my 2.5" 325NG. It has an off-side ammo holder that holds extra loads already clipped up. I got mine to hold 4 extra moon clips and rounds but Mr. Andrews will make the ammo holder to hold however many you want.
I noticed that one poster was speaking about using .45GAP brass for reloading...Can anyone advise as to whether the S&W revolvers in .45acp can tolerate the .45GAP factory ammo? Thanks.
Dillon Precision also sells moon clips, holders and demooners.
Yep. I bought some a year or so ago. They work just fine, as well as the Wilson ones I have. They are cheap enough to load up ammo to stash back.
http://www.oldsargesdropzone.com/product.php?item=1469
BlindJustice
Member
aryfrosty - .45 GAP is shorter than the .45 ACP case length so you would HAVE to use full moon clips if shot in a .45 ACP chamber
>45 GAP runs at .45 ACP +P pressure in order to approximate the
velocity of standard .45 ACP - .45 ACP in full moon clips already has
plenty of clearance in reloading as well as the 22 25 & 625 being more
than strong enough for the relatively low pressure of even .45 +P
almost all the other cartridges the N frame S&Ws are chambered for are
Magnum or magnum pressure ;eve;s i.e 10mm AUto.
R-
s
>45 GAP runs at .45 ACP +P pressure in order to approximate the
velocity of standard .45 ACP - .45 ACP in full moon clips already has
plenty of clearance in reloading as well as the 22 25 & 625 being more
than strong enough for the relatively low pressure of even .45 +P
almost all the other cartridges the N frame S&Ws are chambered for are
Magnum or magnum pressure ;eve;s i.e 10mm AUto.
R-
s
Tim L
Member
This is a great loader/unloader. http://www.mooncliptool.com/ he also has moonclips.
rcmodel
Member in memoriam
The weak link in the .45 caliber N-Frames is the size of the holes in the cylinder.
They are getting awful close to the bolt cuts over the thinest part of the chamber walls.
This is not a factor in smaller caliber Magnums they are chambered for, as there is plenty of steel left at the bolt cuts in .44 or smaller calibers..
rc
jmorris
Member
- Joined
- Sep 30, 2005
- Messages
- 24,392
Clark Custom will convert your 625 to 460 Rowland
(http://www.clarkcustomguns.com/revserv.htm) and it operates at higher pressures than 44 magnum. 45 GAP is the same as 45 ACP +P
SAMMI max pressures are
45 ACP 21,000 PSI
45 ACP +P 23,000 PSI
45 GAP 23,000 PSI
The 460 Rowland operates at 40,000 PSI, there is room to spare.
(http://www.clarkcustomguns.com/revserv.htm) and it operates at higher pressures than 44 magnum. 45 GAP is the same as 45 ACP +P
SAMMI max pressures are
45 ACP 21,000 PSI
45 ACP +P 23,000 PSI
45 GAP 23,000 PSI
The 460 Rowland operates at 40,000 PSI, there is room to spare.
- Status
