S
Super
Guest
Okay. I'm about to junk this thing so any help would be appreciatd.
Timing is fine. Everything is tight. I cleaned out the guts and everything there is fine. While the cyl/bore gap is very tight, it doesn't rub while rey firing and the barrel is square.
1:What kind of oil/grease to use on the internals.
The thing will not fire reliably. The hammer seems to be falling hard enough, I put more tension on the spring. It's denting the primers. The firing pin seems to be going plenty far in. The firing pin looks okay. This happens with multiple different brands of ammo save for the first box of s&b's and reloads with primers that work fine in other guns. If one continues to fire the same round it EVENTUALLY kicks off.
2:***?
When firing the thing binds up. It's fine dry firing but shooting it isn't . Happens with everything.
3:***?
On the last shot it logged a bullet. A 158 gr tmj with 4 gr of unique. This is the second .38 I jammed up.
4:***?
Timing is fine. Everything is tight. I cleaned out the guts and everything there is fine. While the cyl/bore gap is very tight, it doesn't rub while rey firing and the barrel is square.
1:What kind of oil/grease to use on the internals.
The thing will not fire reliably. The hammer seems to be falling hard enough, I put more tension on the spring. It's denting the primers. The firing pin seems to be going plenty far in. The firing pin looks okay. This happens with multiple different brands of ammo save for the first box of s&b's and reloads with primers that work fine in other guns. If one continues to fire the same round it EVENTUALLY kicks off.
2:***?
When firing the thing binds up. It's fine dry firing but shooting it isn't . Happens with everything.
3:***?
On the last shot it logged a bullet. A 158 gr tmj with 4 gr of unique. This is the second .38 I jammed up.
4:***?