Mounting Lee Cast Classic 4 Hole Turret Press

[Spyderman44]

Can anyone give me the mounting flange thickness for the Lee Cast Classic 4 hole Turret Press? I have one being delivered Wedneswday and would like to pick up the mounting bolts today.

 

[rondog]

About an inch. Longer bolts can always be sawn off.

 

[broham]

Just can't wait can ya. Is this your first press? Mine is mounted to a 1/2" thick steel plate that slides into a bracket that is mounted to my bench. This way I can slide out one press and slide in another. The base is roughly 7/8" thick. I don't know the hole diamiter as mine is bolted to a threaded plate. At least 2 1/4" should work. Hope this helps.

 

[Spyderman44]

Thanks for the replies and info. broham, this is actually my third press, I have 2 single stage for reloading rifle. I decided to get this one for reloading pistol, 380, 38 Special, 40 S&W and 45ACP, and you're right, I can't wait!

 

[RandyP]

The holes will take up to a 5/16" bolt.

 

[marsofold]

I keep mine screwed into a 12" x 6" piece of wood that I keep clamped to an old desk with two big "C" clamps. No holes in the desk and I can move it in seconds.