Bayourambler
Member
My own custom built savage 10 :
Savage 10 receiver I took off of a pawn shop .243
I did the accutrigger work myself making a set screw to adjust tension
I cerakoted the parts myself
Ptg bolt and handle
Installed a new Shilen select match barrel; 24” target bull, chambered in .260 Remington VLD, wet sanded and polished to mirror finish
Stock is Bobby Hart long range stock, clear coated
I bedded the entire action with accuglass and floated the barrel
Mounts are DNZ one piece
Scope is Sightron Siii 6-24- 50mm First Focal
I have finished bedding the action and mounted the scope this morning. I test fired it to check the headspace with comparator, I like what I see. Brand new Lapua brass measuring 1.620” and my fired case is 1.622” . I will make some rounds soon and see what she will do. I already have Imr 4350 so I’ll start with that. I bought Hornady 140 eld match, and Barnes 140 matchburners to try. I sure hope it shoots well!
Savage 10 receiver I took off of a pawn shop .243
I did the accutrigger work myself making a set screw to adjust tension
I cerakoted the parts myself
Ptg bolt and handle
Installed a new Shilen select match barrel; 24” target bull, chambered in .260 Remington VLD, wet sanded and polished to mirror finish
Stock is Bobby Hart long range stock, clear coated
I bedded the entire action with accuglass and floated the barrel
Mounts are DNZ one piece
Scope is Sightron Siii 6-24- 50mm First Focal
I have finished bedding the action and mounted the scope this morning. I test fired it to check the headspace with comparator, I like what I see. Brand new Lapua brass measuring 1.620” and my fired case is 1.622” . I will make some rounds soon and see what she will do. I already have Imr 4350 so I’ll start with that. I bought Hornady 140 eld match, and Barnes 140 matchburners to try. I sure hope it shoots well!