Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

My first time shooting a Mosin

Discussion in 'Rifle Country' started by SpringfieldArmoryXD, Mar 15, 2013.

Thread Status:
Not open for further replies.
  1. SpringfieldArmoryXD

    SpringfieldArmoryXD Member

    Joined:
    Jan 10, 2012
    Messages:
    98
    Location:
    Kansas
    Got to take out my mosin for the first time the other day. It was a blast, literally. What is the best way to adjust the front sight? Punch and hammer?

    I even stretched it out to 300 yards on a 12 inch plate and connect 3 out of 5. Sure was fun, you can even see the trace of the bullets at 300 yards. Going to try and get 5/5 next time! Link to video: http://www.youtube.com/watch?v=fa_EnhxYT8w
     
  2. meanmrmustard

    meanmrmustard Member

    Joined:
    Jun 14, 2011
    Messages:
    4,225
    Location:
    Missouri
    I made a sight mover for mine:

    Using 8-32 screws, I can adjust the sights 1/32 at a time by one rotation of the screw, keeping things from being guesstimating. Hammer and punch work, but its a crude way to do things in the 21st century.

    Brassed case Herters shoots well in my M28 Ski Trooper, and I've had bullets touching at 125 so far, groups better than I can shoot.

    Congrats on your first Moist Nugget, it won't be your last.
     
  3. baz

    baz Member

    Joined:
    Dec 16, 2005
    Messages:
    988
    That's good shooting with iron sights. I'm vision challenged, and compensate with a scope on my M-44. It is fun to shoot, but boy is the yellow tip ammo I've been shooting dirty, and hard to clean after a day at the range.
     
  4. Ohio Gun Guy

    Ohio Gun Guy Member

    Joined:
    Apr 29, 2008
    Messages:
    2,466
    Location:
    Central Ohio
    When I go shooting my com-block stuff, I bring the Red Army Approved Adjustment Tools.


    Hammer, Punch, Pliers, Black Tap (No Scratches).
     
  5. mookiie

    mookiie Member

    Joined:
    Sep 16, 2010
    Messages:
    646
    Location:
    Delaware
    Springfield pm Joshua m smith on this forum he makes a nice after market sight if you really want to see what you and the rifle can do. The other alternative would be mojo sights. If you have an AK or SKS sight pushing tool than that is the best way. If not hammer and punch will get her done! Enjoy the new rifle!
     
  6. mookiie

    mookiie Member

    Joined:
    Sep 16, 2010
    Messages:
    646
    Location:
    Delaware
    Meanrmustard - pictures of the sight pusher please!
     
  7. meanmrmustard

    meanmrmustard Member

    Joined:
    Jun 14, 2011
    Messages:
    4,225
    Location:
    Missouri
    I'll do one better.

    PM me any and all dimensions (I sold my sight tool, and have been making several for friends after mine has been zeroed) and ill make you one. I need bottom of barrel to center of sight dove tail, width overall, and bottom of bore to just below dovetail. Send pics too. My M28 will be different than a 91/30.

    I use tool steel, black oxide socket heads, and mole skin to keep from damaging finish.

    I used the tool, sighted in, and killed several deer in the 2012 Show Me State season with an 80 year old rifle.

    Like I said, I've made four... I can make you one.

    Edit: dimensions, sadly, do vary. That's why I inquire..if you'd like one in the future.
     
    Last edited: Mar 15, 2013
  8. palmetto99

    palmetto99 Member

    Joined:
    Mar 14, 2013
    Messages:
    183
    Location:
    Upstate, SC
    Please do not take this as an advert, but try scgunco.com. They did have front sight adjustment tools mad by a fellow I know.

    I've got an M44 and it is a hoot! Good cheap fun. Looking for a 91/30.
     
  9. meanmrmustard

    meanmrmustard Member

    Joined:
    Jun 14, 2011
    Messages:
    4,225
    Location:
    Missouri
    But are ridiculously expensive. That's why I built mine: penny saved, penny earned.

    Mustn't look for a 91/30, they're everywhere...for now.
     
  10. Tolkachi Robotnik

    Tolkachi Robotnik Member

    Joined:
    Jul 26, 2012
    Messages:
    221
    Location:
    Midwest
    Quickest way to get it on sights.

    Affix bayonet in full forward position. The rifles were generally made to shoot to point of aim thus.

    This might look a little odd in the deer fields, but there might be some advantage if hog hunting.

    It looks to me like you are doing pretty well for the first time shooting the Mosin!
     
Thread Status:
Not open for further replies.

Share This Page