Larry in wyoming
Member
- Joined
- Dec 10, 2021
- Messages
- 626
There's been some interest in my rusting chamber so I thought I'd start a thread on it.
It's simple really. It's a piece of 12 inch pvc that I salvaged off of a construction site. I cut a door into it with a saws all. I put a window in the door with 1/8 inch plexiglass, but honestly, don't bother. It fogs up and you can't see anything anyway. A simple tool box clasp hold the door closed. I thought of half a dozen ways to seal the door but none were as easy or more effective than plain old painters tape.
I made the top, bottom, and water pan holder, out of 1/2 inch plywood.
Hooks made from coat hanger wire come down through the top to hang parts on.
An incandescent bulb under the pan heats the water and another one up above keeps the chamber warm.
I have a dimmer switch on mine but I don't think it is really necessary.
That's really about it.
It's simple really. It's a piece of 12 inch pvc that I salvaged off of a construction site. I cut a door into it with a saws all. I put a window in the door with 1/8 inch plexiglass, but honestly, don't bother. It fogs up and you can't see anything anyway. A simple tool box clasp hold the door closed. I thought of half a dozen ways to seal the door but none were as easy or more effective than plain old painters tape.
I made the top, bottom, and water pan holder, out of 1/2 inch plywood.
Hooks made from coat hanger wire come down through the top to hang parts on.
An incandescent bulb under the pan heats the water and another one up above keeps the chamber warm.
I have a dimmer switch on mine but I don't think it is really necessary.
That's really about it.
