To keep it brief - since I'm only loading for ONE rifle, I'm primarily neck-sizing. However, I want to have minimum runout in case prep, and have found that there are three options for this:
- Use the Lee Collet Die, and handle shoulder bump with a Redding Body die.
- Have a Lee FL die customized to match a fired round from your chamber.
- Buy a Redding Type S die (FL preferred, keep the body in spec), and change out bushings accordingly.
Given that I'm reloading for one rifle, but will be using multiple types of brass, what would y'all recommend?
- Use the Lee Collet Die, and handle shoulder bump with a Redding Body die.
- Have a Lee FL die customized to match a fired round from your chamber.
- Buy a Redding Type S die (FL preferred, keep the body in spec), and change out bushings accordingly.
Given that I'm reloading for one rifle, but will be using multiple types of brass, what would y'all recommend?