Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need help finding Savage-Anschutz Match 64 Screw

Discussion in 'Rifle Country' started by brainglitch, Jun 8, 2009.

Thread Status:
Not open for further replies.
  1. brainglitch

    brainglitch Member

    Joined:
    Jun 8, 2009
    Messages:
    3
    I've just come into possession of this wonderful rifle, but unfortunately I'm missing one of the screws securing the action/receiver to the stock. It's directly in front of the trigger. I've been searching and googling and have yet to find it anywhere. Any ideas? Champions and NealJ don't have it. :(
     
  2. Uncle Mike

    Uncle Mike Member

    Joined:
    Nov 5, 2008
    Messages:
    3,129
    Location:
    never never land...never land here!
  3. brainglitch

    brainglitch Member

    Joined:
    Jun 8, 2009
    Messages:
    3
    Unfortunately, none of those websites helped, but I've kept them in mind for future diopter sight purchases. Any other ideas?
     
  4. Uncle Mike

    Uncle Mike Member

    Joined:
    Nov 5, 2008
    Messages:
    3,129
    Location:
    never never land...never land here!
    Well... call Anschutz.

    That's all I know to do short of making one. :uhoh:

    Did you check for a same length, thread pitch, diameter and head type from Brownells?

    They may not have the factory screw but one that would be the same... providing you have this information. :banghead:
     
  5. Carne Frio

    Carne Frio Member

    Joined:
    Aug 28, 2008
    Messages:
    745
    Location:
    Near Fairbanks
    This should work for all Anschutz products:

    http://jga.anschuetz-sport.com

    The site comes up in German. On the far right side there
    are language options. Pick the one you like and then you
    are good to go. Hope this helps yah find your part.:D
     
  6. hhmorant

    hhmorant Member

    Joined:
    Nov 23, 2003
    Messages:
    61
  7. Uncle Mike

    Uncle Mike Member

    Joined:
    Nov 5, 2008
    Messages:
    3,129
    Location:
    never never land...never land here!
    As our esteemed colleague hhmorant suggested...:D

    jnpgunsprings-
     
  8. brainglitch

    brainglitch Member

    Joined:
    Jun 8, 2009
    Messages:
    3
    Thank you so much, dudes. I might have to pick up that striker spring, too. :)
     
Thread Status:
Not open for further replies.

Share This Page