chuckj5
Member
I picked up a used Taurus 82 in good shape with a bad finish. I have disassembled the gun down to the frame for cleaning, polishing and bluing. As I was taking it apart, I took a lot of photos to correctly reassemble. I seem to have a part that does not appear in the photos. It is a small pin, about 1/2" x 3/32" with a nipple on one end, I assume this is for the bolt spring. I really can't identify the part from any schematic I can find on the web. They all seem to be rough and not very clear.
I can't seem to disassemble the cylinder from the extractor. Is there a secret to taking it apart?
Does anyone have access to assembly instructions and/or a readable schematic and parts list.
Thanks for any help.
I can't seem to disassemble the cylinder from the extractor. Is there a secret to taking it apart?
Does anyone have access to assembly instructions and/or a readable schematic and parts list.
Thanks for any help.