Night sight installation for my PM9

[Kentucky Rifle]

When I wanted Trijicons for my Glock 27, I just took it over to Kiesler's and they did it on the spot. (With the tool.) Took less than 10 minutes. I didn't even have to adjust them. They were spot-on from the very start.
The sights on my PM9 look the same. Just push them in. Anybody else have a gunshop like Kiesler's install night sights for them rather than send the slide (or maybe the WHOLE pistol) back to Kahr?

Thanks,
KR

 

[tomkatz]

My local shop does glocks on the spot too, but they kept my kahr k9 overnight, I didn't ask why. I sent my mk9 slide to kahr for the nightsights, the whole gun would cost too much to ship but the slide is cheap to send since it is not considered a gun........tom

 

[dbracin]

Kahr sight installation

Kahr installed my night sights for $20 and that included shipping back to me. It cost $3.85 to ship just the slide to them USPS. My local gun smith wanted $45 to install them, I told him of Kahr's price and he smarted off to me to send it to them. I did and I'm happy I did.

 

[wally]

I got night sights for my P40 from Kahr and installed them myself. No biggie, used a magnifying glass to see from which side the original sights had been installed from and drove out the originals back the way came in with a brass punch and a small hammer after making careful measurments of the notch and blade locations relative to the sides of the slides using a dial caliper.

Drove the new ones in from the same direction as the originals were installed and positoned the blade and notch to the same relative locations. After a range test verified they were dead on, put a drop of locktite on each side of the dovetail.

--wally.