Nipple Wrench Compatability

Status
Not open for further replies.

spur0701

Member
Joined
Nov 3, 2005
Messages
98
I've got a ROA, plus an 58 Remington, and a 51 Navy....and I need a nipple wrench. Is one going to work on all of these or are there differences?
 
OEM ROA nipples have a hex base, and so require a special nipple wrench (available from Ruger Customer Service) or you can use a deep well 1/4" drive socket. There are aftermarket nipples for the ROA that do not use the hex base, thus making a regular pistol nipple wrench usable for an ROA.
 
OEM ROA nipples have a hex base, and so require a special nipple wrench (available from Ruger Customer Service) or you can use a deep well 1/4" drive socket.

This is correct except the hex size is 3/16", unless Ruger changed their nipple dimensions.:confused:

I used a cheap 3/16" nut driver for years to remove and reinstall the nipples on my Old Army. Worked like a charm... much easier to use than the stock Ruger wrench that came with the revolver. Treso nipples now grace my cylinder, so I no longer use the nut driver.
 
I've got a deep socket for the ROA but where's the best place to get a regular wrench for the other two? I checked at Dixie and a few other places but the reviews have said the wrenchs are crap and break on the first use.
 
Last edited:
I changed my stock ROA nipples out for Treso's. They use the more common nipple wrench.
 
Well, bought one from Taylor's (one of the hardened ones, was about $16 with shipping)....it broke on the second nipple....but they are sending me another one......
 
Status
Not open for further replies.
Back
Top