Here's three old timers for ya' . A Stevens model 1915.22. Made early in the production run, with no Savage markings. Stevens was bought out by Savage in 1915 and The guns had "Savage" markings applied during the production run. Next, a 98% Savage 23D with a period weaver Model 344 scope. Gun is almost new...but not "almost enough" that I don't shoot it.
Third is a Ross M-10 Sporter in .280 Ross. The original 7mm Magnum and the first cartridge commercially loaded in North America to over 3000 FPS, In 1907. 145gr bullet @ 3145 FPS was the original load. That can be bettered somewhat with modern powders, raising velocities to just short of 7mm Rem. Mag. levels. The Canadians have an unusual way of proof marking the gun. They stamp the operating pressure of the cartridge on the barrel. This gun was proofed to 28 Tons . If they meant metric tons that's around 62,500 PSI which is in line with modern cartridges. The seven lug interrupted thread bolt was quite an innovation . It was also enormously strong, in tests it has held at over 100,000 PSI. The bolt was never re-polished or re-finished in any way, and the fit and polish of the thing is awe inspiring.
The rifle is simple and elegant. A beautiful testament to old school construction and gunsmithing. The gun had, unfortunately, been re finished, both metal and wood. The original owner liked the "Colt Python" hi luster blue and a glossy stock. Neither of these looked anything like the rifle that left the factory. Fortunately, he did not remove any of the original markings. I removed everything and rust blued the metal and put an oil finish on the stock. It now looks like it should. The barrel is 28" long, which was an option. I wish I had a better camera so I could take better close-ups The craftsmanship on this rifle rivals that of a pre-war M-70. That's about as high a compliment as I can give to a standard production gun. Last picture is the Ross along with an original 1910 catalog.