Bob's Gun Shop MILLIONS OF GUN PARTS !!
Po Box 200 Royal AR 71968
Phone Weekdays ,Central Time 9 to 4 , ( 501)-767-1970
FAX 24 hours a Day (501)-767-1970
We have 42,000 Magazines for over 1100 Models!
140 Page Gun Parts Catalog.....$5 Post Paid in U.S.
HARRINGTON RICHARDSON
ORDER; by Phone, FAX Letter or E-mail.
Or Order Now ! ..........
Or Print an Order Form.......
PAY by Credit Card, Money Order,
Business Check Cash
$4 Minimum Postage
E-Mail
We are snowed under with Phone Calls and E-mail
Please be patient
ALL PRICES ARE NET COST...
Most Pistols use these same General
Parts But ALWAYS State
Model and Caliber.
Click to Enlarge
H&R Western Style Revolvers
586 in .32 Cal
649-650-660-676-686-949-950-976
in....22 Cal
Center Pin.....................................$20
Center Pin Catch Assembly.........$10
Cylinder Stop Assembly............ ..$25
Cylinder Crane. See Picture Below
There are four Basic Cranes.......$30
Ejector Housing............................$25
Ejector Rod...................................$25
Ejector Spring...............................$ 5
Housing Screw Front or Rear.. ...$ 2
Firing Pin ......................................$15
Firing Pin Spring...........................$ 2
Hand With Spring.........................$20
Lifter.............................................$25
Gate..............................................$30
Hammer Spring Assembly...........$20
Sear...............................................$20
Sear Spring....................................$ 2
Trigger...........................................$20
Grips......NET Your Cost...............$30
ASK on other Parts..............Scarce.
See our Grip Page for More Models.
Click to Enlarge
All Barrels except #1 top break is
Excellent Bore and Near Excellent
Outside. Many With Sights
Most one of a kind, All Net Cost.
#1 Top Break Old Model with the
Cylinder. Fair inside and out .38....$75
#2 Top Break .38 Excellent..........$85
#3 Top Break Hammerless .38
With Sight and Latch Excellent.....$100
#4 Top Break Sportsman .22 With
Latch and Sights, Some blue wear.$100
#5 Top Break 925 .38 With Latch.$95
and front sight, Excellent 2 1/2.......$85
925 Top Break 4 inch no latch.....$75
#6 686 .22 7 1/2 No Front. Sight....$70
#7 900 .22 6 Inch With Sight Exc...$60
#8 622 6 Inch .22 With Sight Exc...$60
#9 649 5 1/2 .22 With Sight Exc.....$60
#10 649 5 1/2 .22 With Sight Exc....$60
#11 686 5 1/2 .22 No Sight Exc.......$50
#12 929 2 1/2 .22 With Sight Exc....$45
#13 929 4 Inch .22 With Sight Exc..$55
#14 922 6 Inch .22 With Sight.Exc..$80
#15 732 4 Inch .32 Ft Sight Exc......$50
#16 732 2 1/2 Inch .32 Ft Site Exc..$50
#17 732 2 1/2 Inch .32 Nickle Exc..$60
#18 732 2 1/2 Inch .32 Nickle No S.$50
#19 832 3 Inch .32 With Sight Exc..$75
============
Click to Enlarge
Basic Cylinders. With a rim and
without a rim. Left has built in
ejector rod. Right uses a pin.
==============
Cylinders; MUST BE CHECKED
BY A GUNSMITH BEFORE
FIRING!
Pay close attention to how the
cylinder is made. Some fit several
models. Look at the length, If it
has a cylinder crane with ejector
or or if it has a separate pin to hold
the cylinder in place.
Cylinder Pin is shown to the right
Of the Cylinder that used this method.
Click to Enlarge
#1 Smooth no flues 999 6 shot MAGNUM
1.370 Long. Fits 666-667-649-686 etc.
Cylinders are in new condition.......$70
#2 With a Rim. 6 Shot. 1.325 Long
Basic 622 Model, New Condition..$70
#3 9 shot Short Flue, Length 1.330
Models 900,930-839-903-904..........$70
#4 Long Flue 6 Shot, Length 1.445.
Used a center pin as Shown..............$60
Pin for it is.....................................$15
#5 .32 Caliber Blue Length 1.325
Model 632 6 Shot.............................$70
#6 Same as above but Chrome.........$70
#7 Model 632 6 Shot Used a pin as
shown. Length 1.325 ........................$60
Pin for it is.....................................$15
#8 .38 Model 925 Top Break Long
ejector rod . 1.185 6 shot.................$75
#9 .38 6 shot 1.520 Long Ejector rod
is long. Blue......................................$75
=======
Click to Enlarge
#1 Rear Sight Blade Small.........$15
#2 Rear Sight Blade Large
.090 Thick. Out of thin blade.....$15
#3 Rear Sight Block Type.........$25
#4 Rear Sight & Latch Assy....Out
#5 Front Sight Blade .092 Thick $15
#6 Front Sight Blade.063 Thick..$15
#7 Front Sight 732-295................$15
#8 Front Block Sight 939-158.....$20
#9 Rear Sight 765 Rifle..............$20
Rear Sight step for it................$ 3
==========================
Click to Enlarge
Cylinder Cranes all look alike. The
Key to them is on the bar as shown
in the picture. See the Arrow at #3.
Straight or humped bar.
One of these will match yours $35
===============
Click to Enlarge
#1 .22 With firing pin..................Out
#2 See the front of the hammer where
there is a small protrusion. Used a
hammer spring rod with no head. The
rod fit in a indention in the hammer..$35
#3 Hammer as a flat face. it used a
Mainspring rod with a head..............$35
#4 Hammer Spring Assembly. The
Rod used no head fit into a indention
in the back of the Hammer...............$20
#5 hammer Spring Assembly With
a head................................................$20
#6 Cylinder Stop with Spring............$25
#7 Hand With Spring........................$15
#8 Sear..............................................$20
#9 Lifter............................................$20
Flat Hammer Spring old Models;
Spring on the left is an original. Spring
on the Right can be fitted to many of
the older top break models.
Ask for #94.......................................$15
See the spring page for many other
springs that can be adapted for the very
old top break pistols.
www.gun-parts.com/springs
===============
H&R Pistol Grips
Click to Enlarge
#1 Top Break With a Hammer........$30
#2 Top Break Hammerless.............$30
#3 Model 1876
#4 American Double Action .32......$30
#5 Young America Double Act .22.$30
#6 Young America Double Act .32.$30
#7 722 733 Short Grip.....................$30
#8 732 ,733, 900, 901, 922,923,622
623,929,930 Long Grip Two Piece.$30
No one piece grip available.
#9 1906 Target.................................$30
10 632-633 & Starter Pistols...........$30
#11 Self Load Automatic......25.......$30
Self Load Automatic .32.........$30
#12 Premier, Auto Eject, N Model $30
================
SINGLE BARREL
Topper Models. State Model #
Long Obsolete Models;
Barrel Release Lever.................$15
Lifter Striker Assembly..............$25
Extractor State Gauge................$25
Extractor Spring..........................$ 8
Forend Assy Snap On. NET.......$50
Screw on Forend...Used..NET....$40
Trigger Guard.............................$15
Trigger.........................................$18
Hammer.......................................$25
Hammer Spring ..........................$15
Old Model Hammer Spring........
Double leg spring....................$20
Firing Pin Square Back...............$15
Firing Pin Slope Back.................$15
Click to Enlarge
See Stocks Below.
Butt Plate.....................................$20
Butt Plate Screws Each...............$ 1
=========================
Click to Enlarge.
Top is Round Tang Oil Finish
Middle is Square tang Semi Finish
Bottom is Later Model Singles.
Click to Enlarge
Top single barrel Forend Snap on
Finished....New...........................$50
Bottom Single Forend Screw on
Good used.................................$40
Click to Enlarge
#1 Single Barrel Round Tang Semi .......$75
#2 Square Tang Walnut Semi Finish......$75
#3 Late Model Single Good Used..........$75
#4 Pump/Automatic Shotgun Good used
With Butt Plate, Some storage Dings...$75
#5 Pump/Automatic Same But with pad...$80
Stock Postage and Insured $10
Stock and Forend Postage and Insured $12
=================
H&R 865 Bolt Action 22 Rifle
Obsolete 25 Years or More.
Butt Plate......................................$20
Butt Plate Screws Each................$ 2
Right Extractor.............................$20
Left Extractor...............................$20
Extractor Springs Each................$ 2
Firing Pin 3 9/32 Inch.................$20
Front Sight....................................$15
Magazine ......................NET.....Out
Magazine Release.......................$10
Magazine Release Spring............$ 3
Mainspring....................................$ 8
Rear Sight Blade Dovetail ..........$15
Rear Sight Elevator......................$ 3
Takedown Screw (Scarce)............$15
Trigger Guard................Net.........$20
Model 750 SS Same Basic Parts
========================
H&R Magazines
HARRINGTON RICHARDSON
HR 150-151 Rifle..10 Rd...22 Lr..$30
HR 250-251 Rifle..10 Rd...22 Lr..$30
HR 450-451 Rifle..10 Rd...22 Lr..$30
HR 165 Rifle.........10 Rd...22 Lr..$30
HR 700 Rifle ..22 Magnum......OUT
HR 700 .22 LR..............................$35
HR Pistol...............6 Rd.......25...$30
HR Pistol...............................32...$30
HR .........................7 Rd........32...$30
========================
$4 Minimum Postage
========================
Call ONCE And Get a
CUSTOMER NUMBER.
We then have all credit card Information and you can Order
Safely on regular E-mail ...FAST!
=======================
OR...... just request a
Customer Number....
and give us credit card information
=======================
===========
H&R French Import Shotgun
By Manufrance/LaSalle
Pump Shotgun Model 440
Magazine Tube...................................$40
Magazine Follower.............................$10
Magazine Split Ring..........................$ 3
Magazine Spring................................$ 8
Magazine Cap....................................$30
Right Or Left Cartridge Stop............$25
Stock No Discount. Storage Dings...$75
Butt Plate...........................................$15
Butt Plate Screw Each.......................$ 1
Forend No Discount...........................$45
Forend Securing Nut..........................$15
Stock Bolt and Washer......................$10
Bolt Stripped.......................................$50
Bolt Operating Plate...........................$40
Lock Bolt............................................$40
Firing Pin.............................................$20
Firing Pin Spring..................................$ 5
Extractor..............................................$15
Extractor Spring & Plunger................$ 5
Trigger Guard Stripped......................$50
Trigger Housing Pin Each..................$ 5
Trigger.................................................$25
Trigger Spring.....................................$ 2
Hammer ..............................................$25
Hammer Spring...................................$ 5
Hammer Push Rod..............................$ 5
Safety Catch........................................$15
Safety Spring & Plunger.....................$ 5
Carrier.................................................$30
Carrier Operator.................................$20
Carrier Spring......................................$ 4
Slide Stop.............................................$25
Slide Stop Spring.................................$ 4
Slide Stop Spring Screw......................$ 3
Slide Stop Release..............................$10
Sear......................................................$30
Sear Safety..........................................$20
Sear Safety Spring & Rivet................$ 5
Ejector..................................................$15
Ejector Front or Rear Rivet Ea...........$ 5
Ejector Spring.......................................$ 8
Front Sight Ramp.................................$15
Front Sight............................................$ 3
Ask on other Small pins etc...
$9 Stock Postage and Insured...
======================
H&R Import Shotgun France
MANY Import Names. Stoeger
Manufrance, Lasalle,
Automatic Shotgun
Magazine Tube.....................................$40
Magazine Securing Screw....................$ 3
Magazine Spring...................................$ 6
Magazine Follower...............................$10
Magazine Cap......................................Out
Left or Right Cartridge Stop................$25
Stock No Discount................................$70
Stock Bolt & Washer............................$ 7
Stock Mounting Nut..............................$ 7
Butt Plate...............................................$20
Butt Plate Screw Each...........................$ 2
Barrel Scarce........................................Ask
Bolt Stripped..........................................$50
Bolt Operating Plate..............................$40
Lock Bolt................................................$40
Firing Pin................................................$20
Firing Pin Spring....................................$ 5
Extractor................................................$15
Extractor Spring & Plunger..................$ 5
Trigger Guard Stripped........................$50
Trigger Housing Pin Each.....................$ 5
Trigger...................................................$25
Trigger Spring.......................................$ 2
Hammer................................................$25
Hammer Spring.....................................$ 5
Hammer Spring Push Rod....................$ 5
Safety Catch.........................................$15
Safety Spring and Plunger....................$ 5
Carrier..................................................$30
Carrier Operator..................................$20
Carrier Spring.......................................$ 3
Carrier Push Rod..................................$ 5
Slide Stop...............................................$25
Slide Stop Spring...................................$ 4
Slide Stop Spring Screw........................$ 3
Slide Strop Release..............................$10
Sear.......................................................$30
Sear Safety...........................................$20
Sear Safety Spring and Rivet..............$ 5
Ejector...................................................$15
Ejector Rivet Front or Rear Ea...........$ 5
Action Spring........................................$15
Action Spring Stop................................$ 5
Action Spring Collar.............................$ 7
Piston.....................................................$25
Piston Ring............................................$10
Selector Plate........................................$ 5
Selector Plate Spring and Ball.............$10
Damper.................................................$15
Damper Spring......................................$ 4
Stock Postage and Insured $10
Stock and forend $12
