pawn shop mossberg 500

Status
Not open for further replies.
I believe the poster said it looks to be like brand new, so why would he want to take it apart and clean it? Just check the bore for any obstructions.

Further I don't believe in placing live rounds in the gun while at home and seeing if they cycle, too many people have been hurt or even killed doing so.

I would simply take the gun out in the boonies with a box of shells and proceed to shoot it. I'm sure you can download on your computer the Mossberg owners manual just prior to taking it out.
 
i paid 200$ and when i took it home to inspect it, it looked like it was never even fired. it shot 100+ rounds flawlessly. when i started counting i shot 25 out of 25. it turned me into a mossberg fan thats for sure!
 
I believe the poster said it looks to be like brand new, so why would he want to take it apart and clean it? Just check the bore for any obstructions.

Further I don't believe in placing live rounds in the gun while at home and seeing if they cycle, too many people have been hurt or even killed doing so.

I would simply take the gun out in the boonies with a box of shells and proceed to shoot it. I'm sure you can download on your computer the Mossberg owners manual just prior to taking it out.

Reason for using live rounds is to ensure proper chambering and ejection of ammo. I've never seen shotgun snap caps, but if you can find them then that is an alternative.

If you cannot handle using live rounds in any gun, then you should go back to basics and relearn the safety rules.

Unfortunately not everyone can just go to their backyard and shoot a few rounds to testfire a gun. Many of us in the cities have no choice but to go to an indoor range.
 
Congrats on your new purchase! Buy up some ammo and go wear it in.

I wouldn't modify it at all until you've run a few thousand rounds thru it. Get used to it in the original configuration. Then decide if it needs changing. The extra parts won't make you shoot better, trigger time will.

(Nothing against modifications, my 870 is not stock.)
 
tnxdshooter,

and here I thought this was The High Road.

I do own horses though and recognize the difference between what I personally have seen in a class from Morrigan Consulting that included LEOs and DOD folks besides private citizens and that which you referenced.

What I saw was side saddle type mounts failing and dropping rounds during movement.

Your experience may be yours but mine is mine and no less true.

As an example in my experience a pistol grip on a Mossberg 500 is a bad idea because it negates the advantages of the tang mounted safety. You seem to feel otherwise and I feel no desire to make ugly comments on your choice. I like the idea of having a standard stock on an entry gun or HD gun because it gives me the feeling that I have more options short of shooting in that I trained in bayonet fighting before it became "instinctive" and so learned to make extensive use of the butt of a weapon as a weapon and I would not feel comfortable doing so with a sliding AR type stock. Again I see no need to get nasty and call your opinions something I spread on my garden.

On the other hand if you gave me your Mossy I personally would remove the side saddle and find a traditional Butt stock for it (perhaps a Youth stock if I was going to be using it primarily with heavy body armor) but I respect your decision to set up your gun as you choose.

Aren't those Ghost ring sights about the neatest thing ever put on a social shotgun? I really like them. Mine were dead on at 75 yards with the foster slugs I was using when I got mine, but I called Mossberg to ask about adjusting them so I would better understand how. The asked where it was shooting and when I told them they simply asked why I would want to adjust the sights and left it at that.

-kBob
 
Mossberg 500, is a good pump shotgun. It has only one flaw, if dropped on its flat side of its receiver, the ejection bar(slide ejection assembly) may pop off in the receiver,not a big problem, pull out the trigger ass. and with your finger put it back in the hole. easy fix! otherwise they take a beating! I stand by mossbergs,easy to clean, change barrels,lots of accessories.
 
tnxdshooter,

and here I thought this was The High Road.

I do own horses though and recognize the difference between what I personally have seen in a class from Morrigan Consulting that included LEOs and DOD folks besides private citizens and that which you referenced.

What I saw was side saddle type mounts failing and dropping rounds during movement.

Your experience may be yours but mine is mine and no less true.

As an example in my experience a pistol grip on a Mossberg 500 is a bad idea because it negates the advantages of the tang mounted safety. You seem to feel otherwise and I feel no desire to make ugly comments on your choice. I like the idea of having a standard stock on an entry gun or HD gun because it gives me the feeling that I have more options short of shooting in that I trained in bayonet fighting before it became "instinctive" and so learned to make extensive use of the butt of a weapon as a weapon and I would not feel comfortable doing so with a sliding AR type stock. Again I see no need to get nasty and call your opinions something I spread on my garden.

On the other hand if you gave me your Mossy I personally would remove the side saddle and find a traditional Butt stock for it (perhaps a Youth stock if I was going to be using it primarily with heavy body armor) but I respect your decision to set up your gun as you choose.

Aren't those Ghost ring sights about the neatest thing ever put on a social shotgun? I really like them. Mine were dead on at 75 yards with the foster slugs I was using when I got mine, but I called Mossberg to ask about adjusting them so I would better understand how. The asked where it was shooting and when I told them they simply asked why I would want to adjust the sights and left it at that.

-kBob

It is the high road. I just don't want people giving, misinformation is all. To say that side saddles cause problems is misinformation.

Sent from my mind using ninja telepathy.
 
Velcro sidesaddles, even better than bolt ons. Less bulk, easy to replace and refill. Lighter. Cheaper.
 
tnxdshooter,

Sir,

Again there is not one whit of inaccurate information given. My original post indicated this was my direct personal experience and that I will not mount another on my 500.

The fact that my direct personal experience is different from yours does not make it inaccurate.

please stop being offensive.

-kBob
 
tnxdshooter,

Sir,

Again there is not one whit of inaccurate information given. My original post indicated this was my direct personal experience and that I will not mount another on my 500.

The fact that my direct personal experience is different from yours does not make it inaccurate.

please stop being offensive.

-kBob

I wasn't trying to be offensive. Did you ever try and have a gun Smith mount it to the receiver? Maybe that's why I've never had a problem.

Sent from my mind using ninja telepathy.
 
A Benchmark

The 500 is the cornerstone of the Mossberg line and has been very dependable since the first one was sold! Police, Military, and sportsmen attribute to it's worth!
I own aWards "Dealer" gun that I bought thru a Pawn Shop for a "C" Note. I have modded to a 19inch H/D gun. It functiones well with the first 3 shells but the other 3 malfunction. I think the spring is gone and maybe the shell holder might be rounded though it works GREAT with the first three!
I just load 3 and feed as used for now...
See you can get a decent functioning gun but there just might be hidden issues but at Pawn Shop prices (Low) you can afford to remedy the minor ones. Some things you can't see in the store that's why a function test is so important! The fact your store offers the 2 day run says a LOT!
Hope you get a nice piece!
BPDave
 
thanks mcgunner. btw fellas i doubt ill be adding any aftermarket products to this particular firearm. its performing beautifully as the 200$ backyard clay buster i bought it for.
 
My 500 is 21 years old, has been hunting the salt marsh ducks and geese for all that time, worst of conditions. It's been dunked in the muck way more often that I'd like to admit. Kinda hard walking through salt brass and mud that tugs at your waders. It's camo finished and plastic stocked for the purpose, ain't pretty, is a pure working gun and I'm sure it'll be working long after I'm not.

j7yvle.jpg

Here's my pawn shop 535 (3.5" chamber, otherwise a 500). $170. Someone cut the stock to 13" pull length and didn't fit the recoil pad. I need to do that, I guess, and buy a small slip on limb saver to increase LOP when I'm not wearing a heavy coat. The gun is perfect in every way, nearly new, otherwise.

1rrc50.jpg
 
Status
Not open for further replies.
Back
Top