Okay, I'll play. But I will warn you that I'm no Oleg behind a camera.
eta details: The two 5" Kimbers are pretty much the same, I think the previous owner put the aluminum trigger in one. One is a classic stainless, and the other is just a stainless, I dont know the difference. The poly Kimber has over 10k though it, I had to swap the slide stop out, and I added a Rescomp mag catch to allow the use of P14 mags, also added a Kimber Ambi Safety and had the grip safety blasted. The 4" is pretty stock. All have had the FLGRs swapped for short ones.
The AR on the left is a CMMG upper, stock, and LPK on a BM lower. The sight is an EOTech 552, with an A1 BUIS from cncguns.com. The light is a G3, in cheap rings, on a FSB mount from CDNN. The 9mm is RRA, put together by me, with a colt mag and a CNCguns.com A1 handle. The 590 has had 1.5" cut out of the stock and I used a limbsaver slip-on recoil pad for a youth model. Its got a surefire forend (9V tube coming soon), the bayonet lug has been ground off, and it has a tac-start side siddle.