okay guys i'm back with a new powder. i have already worked up loads for these calibers and like them but however i can't find the powder i used anymore. i recently got a 4 lb jug of power pistol and plan on using them on all my current loads. that includes .40 sw, 9mm and 380 auto. the guns are: glock 22, beretta 92fs, and colt mustang government. all will be for target ammo as usual. here's the bullets i'll be loading and the data i have surfed and come up with, can't seem to find any published data:
1) Winchester 124 gr FMJ Flat Base
Loaded at 5.0, 5.2, 5.4 gr @ COL 1.135
- i have 100 of these and don't plan on loading these in the future
2) Xtreme 9mm 124 gr RN plated
Load at 5.0, 5.2, 5.4 gr @ COL 1.135
- my preferred 9mm bullets
3) Xtreme 9mm 115 gr HP Plated
Load at 5.0, 5.2, 5.4 gr @ COL (to be determined)
- i have 400 of these and don't plan on loading these in the future
4) Xtreme 40sw 180 gr FP Plated
* could not find any data but Lee manual list 180 gr XTP bullet starting at 6.3 and max at 7.2 gr going 903-1013 FPS
Loading at 6.4, 6.6, 6.8 gr @ 1.130 (the estimated velocity @ 6.8 should be safe for the plated bullet)
- my preferred 40sw bullet
5) Xtreme 380 100 gr FP Plated
Loaded at 3.8, 4.0, 4.2 @ COL .975
- my preferred 380 bullet
tell me what you guys think and your experiences with similar bullets... too hot? too low? overall i think the 9mm is going to be okay. not sure about the .40 and 380. i'm planning on buying the chrony f1 in the near future to get some reading. thanks.
1) Winchester 124 gr FMJ Flat Base
Loaded at 5.0, 5.2, 5.4 gr @ COL 1.135
- i have 100 of these and don't plan on loading these in the future
2) Xtreme 9mm 124 gr RN plated
Load at 5.0, 5.2, 5.4 gr @ COL 1.135
- my preferred 9mm bullets
3) Xtreme 9mm 115 gr HP Plated
Load at 5.0, 5.2, 5.4 gr @ COL (to be determined)
- i have 400 of these and don't plan on loading these in the future
4) Xtreme 40sw 180 gr FP Plated
* could not find any data but Lee manual list 180 gr XTP bullet starting at 6.3 and max at 7.2 gr going 903-1013 FPS
Loading at 6.4, 6.6, 6.8 gr @ 1.130 (the estimated velocity @ 6.8 should be safe for the plated bullet)
- my preferred 40sw bullet
5) Xtreme 380 100 gr FP Plated
Loaded at 3.8, 4.0, 4.2 @ COL .975
- my preferred 380 bullet
tell me what you guys think and your experiences with similar bullets... too hot? too low? overall i think the 9mm is going to be okay. not sure about the .40 and 380. i'm planning on buying the chrony f1 in the near future to get some reading. thanks.