Price check

[TimH]

How do these prices look on these used guns? I know it depends on condition but let me know what you think. The Ruger ssems a bit high cosidering it isn't the SS model. The wIn mod 70 lists for around $700 according to the Win. website but agaian I don't know codition. I couldn't any pricing info on the others:

Savage model 340b, 222 cal. Bolt action with clip. $150.00

JC Higgins Model 583-1101 20 ga. Bolt action. $125.00

Remington Model 511 Scoremaster, .22 cal. bolt action with clip. Weaver 4x scope. $125.00.


Winchester model 70, 30-06, blued, wood monte carlo stock, rifle sights. $175.00

Marlin model 882SSV, .22 magnum, stainless steel, synthetic stock, Tasco 3x9 scope. with clip and 50 rounds. NIB, never fired. $275.00

Rugar model 1022, .22 cal. rim fire, blued, wood stock. 3x9 scope, ammo, 2-10 round magazines, 2-30 round magazines.. $175.00

 

[ACP230]

Assuming they're in good condition those prices sound relatively OK to me. The big mags with the Ruger are fetching $45-$60 used, depending on the make. Butler Creek 10/22 mags are usually higher, Ram-Line mags usually lower.

I'd probably offer less on the bolt action shotgun and on the .22 Magnum just on general principles.

 

[Art Eatman]

Unless that Model 70 is really beat up and has a rusty hole in it, I'd jump all over that sucker! Even then, the receiver and the stock are probably worth $200 or so...

The other prices look okay (assuming decent condition), although I wouldn't be interested in the Savage 340 or the JC Higgins shottygun.

Art

 

[Rob62]

Savage model 340b............ $150 - Very good to good deal! Personnaly, if it were .223 caliber I'd jump on it.

JC Higgins Model 583-..............$125 - Average Deal

Remington Model 511........ $125 - Very good to good deal


Winchester model 70---------$175 - As Art said this is a great deal! I don't even need another 30-06 and would get this gun as fast as I could get the money out of an ATM.

Marlin model 882SSV........ $275 - I've got mixed thoughts on this, it seems slightly higher than market price. I.E. Not that good of a deal unless you really want the gun.

Rugar model 1022............$175 - Very good deal. The two pre ban (presuming they are) 30 rd mags are worth $75 alone.

I've based my opinions on what I see these types of guns selling for at local gun shows and pawn shops.

Regards,

Rob

 

[TimH]

I'm probably gonna go look at the Win. Mod.70 & the Ruger. Any thing in particular I should look for?

 

[Rob62]

TimH,

Here's what I look for when purchasing a used rifle.

1. Overall condition - is there any obvious damage such as rust, pitting, etc.

2. Have any modifications been made to the gun and who did them. While adding glass bedding or a recoil pad is fairly easy to do, many "professional" gunsmiths can't get it right. So look for the quality of work, good work = someone who cares about his firearms.

3. Are any parts missing? I see a lot of bolt action rifles that have had their rear sights removed for scope installation.

4. Look through the bore with a bore light. Is there any pitting or rust. A dirty bore many times hides this. If possible get the person to run a patch down the bore before inspection. Some times crooked dealers will also generously lube the bore to hide imperfections such as slight pitting. Be very wary of a heavily lubed bore.

5. If at all possible specially on the M70, remove the stock from the barreled action. Even though the rifle could look great on the outside there could be rust or pitting under the wood. I've found that if the outside looks rough then in all likelyhood there will be some rust under the wood.

6. Check the 10/22 30rd mags to see if they are marked "Not for import into the USA" or something similar. These could potentially be post ban hi cap mags that were brought in from Canada or other country. Also 10/22 speciffic - check the trigger pull. If lighter than normal find out who lightened it and how it was done. I purchased a used 10/22 that someone had litterally ground down the hammer/sear notch to get a light trigger pull. I had to replace the parts. Replacing parts = more $$ spent

7. Do all moving parts function as they are supposed to. Check the safety for function and any features such as bolt releases, floor plate releases, etc.

8. Check any accessories such as the scopes for damage and function. If adjustable power scopes, make sure to turn the power adjustment knobs and objective lens if also adjustable.

These are just some basic ideas and should give you an idea if what you think is a good deal, really is a good deal.

I have to keep reminding myself that an inexpensive firearm that is not in good condition can in the long run cost you much more than you are initially saving.

Regards,

Rob

 

[TimH]

Thanks Rob62