Hi,
I Just finished setting up my hornady LNL Auto press and i'm having a problem and need help.
The problem is that when the shell plate is indexing around the base plate it is fine until the case recess that lines up with the notch on the shell plate that goes over the centre of the mounting bolt gets to the priming point on the press.
When this particular recess on the shell plate gets to the recess where the case is primed it doesn't index all the way around to line up with the priming recess. Therefore the case doesn't get primed.
So i have to either move it manually or move the lever up slightly so that it will complete the cycle. This recess seems to work fine the rest of the way around the base plate except for the priming point.
I've tried the two shell plates that i have and they both do it.
I would ring Hornady but I live in Australia and bought the press on the internet. I've e-mailed Hornady but thought i'd ask here to see if i can get a quicker response.
Thanks for any help or suggestions you can offer.
I Just finished setting up my hornady LNL Auto press and i'm having a problem and need help.
The problem is that when the shell plate is indexing around the base plate it is fine until the case recess that lines up with the notch on the shell plate that goes over the centre of the mounting bolt gets to the priming point on the press.
When this particular recess on the shell plate gets to the recess where the case is primed it doesn't index all the way around to line up with the priming recess. Therefore the case doesn't get primed.
So i have to either move it manually or move the lever up slightly so that it will complete the cycle. This recess seems to work fine the rest of the way around the base plate except for the priming point.
I've tried the two shell plates that i have and they both do it.
I would ring Hornady but I live in Australia and bought the press on the internet. I've e-mailed Hornady but thought i'd ask here to see if i can get a quicker response.
Thanks for any help or suggestions you can offer.