Question: A&G Glock 21 to Glock 30 magazine spacer

[buck00]

I need some advice.

I currently own a Glock 30. Love it. It shoots great and it is my primary CCW. I am interested in using a Glock 21 mag to increase the capacity. Obviously this would leave a gap between the grip and the magazine. So I am interested in getting an A&G magazine spacer:

http://www.ajaxgrips.com/ajax/ag?set=02,440faa52

My question is: has anyone here had any experience with A&G sleeve extension specifically when using a glock 21 mag in the Glock 30? How do they feel? Are they solid? Are they comfortable? Any comments, reviews, recommendations or advice would be appreciated.

Thank you.

 

[Tazz10m]

Here is my 10mm setup with my G29 with A&G on a G20 mag and +4 Grams mag extender on the end of that. Package is wrapped in a camo AGrip. Capacity is 20 rounds total. This setup is the exact same size as your G30 with G21 mag would be with A&G and +4 Grams. It works absolutely fantastic. I did buzz off the middle finger hump on the G29 and now it is MUCH more comfortable and "fitting". I also did slight modifications as far as buzzing off sharp corners/angles on the +4 and slight adjustments to the fitting of the A&G on the magazine. While all was not a true "plug and play" installation, it was truly easy to do and well worth the effort. Balance is perfect with the short slide/barrel and the heavy mag setup works like a counterbalance to keep the muzzle down on recoil. Super easy to conceal. Not too heavy at all. Very accurate and reliable. Very solid and makes the gun even more controllable. Super easy to manipulate magazine removal and insertion. Highly recommended quality combination. No problems. As with any new accessories, make sure you test and make any adjustments before relying on it for CCW.

 

[buck00]

Tazz10m

Thanks for replying (I was beginning to hear crickets chirping) and thanks for taking the to post the pic. Your G29 looks pretty sweet!

I am going to give it a try. Thanks again!

 

[Tazz10m]

You're welcome! I'm not sure why people don't use the A&G's more, i think they are a good product. Maybe it's because hanging to the mags more might cause more stress on the mag catch and prematurely wear it out, although i've never heard any complaints about this from anybody. My theory is that if i hang on to the gun frame high like i should, the stress will be minimal. I've never had any problems and i've been using mine for years. You might also want to be careful you don't get pinched when inserting the magazine. I've never been pinched, either, but that may be because i've made slight modifications to "radius" and so "soften" certain edges and i use the AGrip.