blueridgeMTNs
Member
- Joined
- Aug 29, 2014
- Messages
- 32
Looking at the Speer #12 Reloading Manual in section covering the 6mm/243W it shows 85 Grain (part # 1213) reduce load of IMR 4198 of between 17.0 and 19.0 grains.
My question with this is I have the Speer 100gr (part # 1220) and there is no reduced load listed. I was wondering if reduced loads listed apply to a particular bullet only? Speer does not list reduced loads for the 100gr so does this means reduced loads cannot be applied to this bullet? They also list reduced loads for the 90gr bullet.
Another question I have the Speer #14 manual and these bullets do not have reduced loads listed for the bullets. What does this mean? Does that mean Speer no longer suggest reduced loads for the specific bullets? And that we should not be using Speer #12?
Here is what I am trying to do...develop reduced loads for my kids rifle exp with a deer bullet so get his so shoot a bit heavier bullet. I have 95NBT and Hornady 100gr and Speer 100gr. I know Hornady and other manual mention reduced loads with IMR4198 and H4895.
Looking at the Speer #12 book I see the 100gr (#1220) can be load with H414 (with mag primers) at 29.0gr for 2270fps. This may work but curious if there are other reduced loads for the 95NBT and Hornady 100gr. I just do not find reduce loads for these two bullets.
My question with this is I have the Speer 100gr (part # 1220) and there is no reduced load listed. I was wondering if reduced loads listed apply to a particular bullet only? Speer does not list reduced loads for the 100gr so does this means reduced loads cannot be applied to this bullet? They also list reduced loads for the 90gr bullet.
Another question I have the Speer #14 manual and these bullets do not have reduced loads listed for the bullets. What does this mean? Does that mean Speer no longer suggest reduced loads for the specific bullets? And that we should not be using Speer #12?
Here is what I am trying to do...develop reduced loads for my kids rifle exp with a deer bullet so get his so shoot a bit heavier bullet. I have 95NBT and Hornady 100gr and Speer 100gr. I know Hornady and other manual mention reduced loads with IMR4198 and H4895.
Looking at the Speer #12 book I see the 100gr (#1220) can be load with H414 (with mag primers) at 29.0gr for 2270fps. This may work but curious if there are other reduced loads for the 95NBT and Hornady 100gr. I just do not find reduce loads for these two bullets.