Lennyjoe
Member
Good luck finding it. Not on the market anymore
my local shop is completely stocked on all powders, Pinto Guns in Renton WA. It’s a old timers shop and they are mean to everyone with questions, @GeoDudeFlorida would fit right inGood luck finding it. Not on the market anymore
I don’t see the point in mouse fart loads with 10mm, just get a .40
that sound cool but I don’t want to be on a government listSubsonic 180 grainers out of my suppressed Banshee Mk10.............ARE QUITE AWESOME......!!!!!
that sound cool but I don’t want to be on a government list
Tax Stamp list, look what they did to Larry VickerWhy would you be on a list.......?
They just waiting for an excuse
they already know what I got, constitutional rights and stuffYet you post pics of your firearms on a public forum..........
...............ANYWAY........LPP Magnum should be ok with a worked up loading......be safe......
my local shop is completely stocked on all powders, Pinto Guns in Renton WA. It’s a old timers shop and they are mean to everyone with questions, @GeoDudeFlorida would fit right in
800x is better to get 1275? I think I seen some. fyi… 10mm brass is hard to findThen go see if they have 800X……
if your not pushing pressure right to the max I would probably just swap it, shoot it across a chrono to make sure there was no major velocity change and be done with it. Changing primers between regular and magnum in that cartridge is likely not going to make much change at all. Winchester does not even make a Large Magnum Pistol Primers their Larger Pistol Primer are suggested for both regular and magnum larger pistol uses.
Snag it up! At least a couple of #'s.I’m going to try longshot, seen that on the shelves,
I agree.This, exactly:
thanks! do you have light primer issues?My 6" KKM barrel in my Glock just a few weeks ago went right at 1300fps with 13gr of AA #9 with 2 different 180 jhp bullets. I'm using CCI LP Magnum primers. AA9 does everything I want it to do so it is the only powder I've ever tried in 10mm.
thanks! do you have light primer issues?
thanks bud! I just found a stash of 165gn frangible that I forgot about. Going to try Accurate #5 at 20% under max and see what speed I’m getting.I use large pistol mag under a charge of blue dot or HS7. Has worked fine for thousands of loads. Probably unnecessary for those powders. but like you, it was the primers I had on hand. and the load manual specified mag primers so that's what I bought.
800x is better to get 1275? I think I seen some. fyi… 10mm brass is hard to find
they had factory loaded 10mm for $26/box a few weeks ago, I should have picked up some
9.3 Longshot, Hornady 180 FMJ, Fed 150 LPP, Starline...avg 1276 from a G20.Anybody got a load for 1275-1300fps 180gn?