RCBS Green machine !!!!!

[alca]

Hi, i'm looking for a green machine setting for the 9mm, i know it's very rare but i just asking.........
Thank
Alain

 

[GW Staar]

Green machines aren't rare.
9mm cal. reloading dies and tools, bullets, & cases, are anything but rare.
So you must be looking for a rare "setting"...whatever that is.

You may want to reword your post...elaborate on your needs...

 

[bomb dropper]

This is about as much help as I can give you. if RC or Walkalong read this they could probably tell you more.

http://www.rcbs.com/downloads/instructions/FINAL_GREEN_MACHINE.pdf

 

[alca]

Sorry if i made a mistake in my asking.... I mean by Green machine, it's a progressive reloading machine setting for one caliber only.
It was in 38 special, 9mm,.45 acp. What i'm looking for is 9mm setting.
I put a picture...
Thank

 

[hydraulicman]

you can just get a dillon square deal B

you can get one that only loads 9mm

or a lee pro 1000 in 9mm for 170 but requires a bit more tweeking now and then. atleast that's what i hear

 

[45ACPUSER]

It is POS machine; and IRC it is not supported by RCBS.

 

[roc1]

It is junk I bought one cheap. It was the only loading machine other than an old Berdan which was a copy of a Starr. These two machines I could never get to run. Stay away get a Hornady or Dillon instead. I have tried several brands and these two I just mentioned are the best now adays. The old Starr which Dillon copied a lot from was a great machine but no parts available any more easily.
roc1

 

[LiveLife]

After browsing through the pdf manual for the "Green Machine," my Pro 1000 actually looks simpler in comparison.

And you have to "hand load" the case feeder! that's time consuming.

I like the $12 case collator for Pro 1000 much better. 2-3 handfuls of cases with a little shake and all the tubes are loaded - fast.