Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Recommended Bullet for 32 H&R Mag Ruger Single-Six

Discussion in 'Handloading and Reloading' started by Incrediblerod, Nov 28, 2008.

Thread Status:
Not open for further replies.
  1. Incrediblerod

    Incrediblerod Member

    Joined:
    Nov 28, 2008
    Messages:
    21
    I currently load a 78gr LRN with 2.8 grains of Bullseye.
    Would a 98 or 100 gr lead bullet be more accurate?
    Can I use a 115gr 32-20 bullet (.313)?

    Thanks
     
  2. Walkalong

    Walkalong Moderator

    Joined:
    Nov 20, 2006
    Messages:
    45,616
    Location:
    Alabama
    I shoot a Berrys bullet in .32 long and .32 Mag and they shoot pretty well. The weight probably isn't going to make a difference. A different bullet might shoot better just because your gun likes it better.
     
  3. Dave B

    Dave B Member

    Joined:
    Jun 26, 2007
    Messages:
    141
    Hornady 90gr swc work great. they are .314 dia. I tried some Magtech 98gr without success. They were 98gr lead RN sized to .312. I have better luck with fatter bullets with almost everything.
     
  4. moosehunt

    moosehunt Member

    Joined:
    Jan 10, 2008
    Messages:
    893
    I've had real good luck with Silver State Bullets 100 gr SWC. I use a basically max dose of H110 behind them.
     
Thread Status:
Not open for further replies.

Share This Page