If using lead bullets, how about using bullets sized properly for the barrel?
I'll be mindful of my crimp and measure for bullet creep/jump once out to the range
Not sure where they headspace but they don't utilize moonclips. Came across this recent article:
https://www.thetruthaboutguns.com/2...rnham-bullet-jump-makes-9mm-snubbies-a-no-no/
I'll be mindful of my crimp and measure for bullet creep/jump once out to the range.
Thanks nevadabob. In truth, bullet creep/jump is what I was wondering about.Not sure where they headspace but they don't utilize moonclips. Came across this recent article:
https://www.thetruthaboutguns.com/2...rnham-bullet-jump-makes-9mm-snubbies-a-no-no/
I'll be mindful of my crimp and measure for bullet creep/jump once out to the range.
In an article on the Pitbull from "The Shooter's Log" (10-11-14) I found these words: "The chambers of the cylinder are also stepped so the case mouth of the 9mm bottoms out or headspaces on the step and does not fall through the chamber."
A BMT Equipped mooner/de-mooner is the cat's meow when coming to loading/unloading the moon clips but they are a bit pricey.