Reloading

[Cap182st]

Any advice on load data 243 tsx barnes copper bullet, 90 grain ,cannot find any info on the reloading books, I have 4350 3031 cfe223 Bl C (2)

 

[mrawesome22-250]

https://www.barnesbullets.com/load-data/

 

[Zahn]

That's odd that Barnes doesn't list a 90 grain projectile.

The Hodgdon site does list H4350 as a valid powder for a 90 grain bullet for the .243 Winchester but it doesn't list IMR 4350. None of your other available powders are listed as suitable.

 

[Hugger-4641]

My Lyman 44th does list a 90gr jacket with 3031 and Ball C2, but I'd work very cautiously if using this data. It's still useful, but it is over 50yrs old.

 

[AJC1]

My Lyman 44th does list a 90gr jacket with 3031 and Ball C2, but I'd work very cautiously if using this data. It's still useful, but it is over 50yrs old.
View attachment 1064468

I don't know if I would use cup and core data on monos unless I was very familiar with the adjustments in charge based on the differences... it's something for sure but loosely related.

 

[AJC1]

chrome-extension://oemmndcbldboiebfnladdacbdfmadadm/https://www.barnesbullets.com/wp-content/uploads/2021/05/243-Winchester.pdf
I would start with the 95 grain load data. Make any adjustments as nessary as both a very slightly heavier and lighter bullet is listed.

 

[Cap182st]

That's odd that Barnes doesn't list a 90 grain projectile.

The Hodgdon site does list H4350 as a valid powder for a 90 grain bullet for the .243 Winchester but it doesn't list IMR 4350. None of your other available powders are listed as suitable.

Thank you

 

[Cap182st]

https://www.barnesbullets.com/load-data/

Thank you