emmie
Member
was brought a rem700/233cal that the owner has jamed a live round in the chamber. had to remove the barrel to open the bolt.
he was reloading,and took some brass that was shot in another rifle and tryed out his new neck sizeing dies. did not full size first,sayes he did't know he had to.
so,here i am, with this live round stuck in chamber. the barrel chamber end is now sitting in a jar of kroil. think i might try tapping the bullet{hp} back into case to let oil kill powder then drive out.
first time with this problem,so i have a high pucker factor.
open to all suggestions
thank you-
emmie
he was reloading,and took some brass that was shot in another rifle and tryed out his new neck sizeing dies. did not full size first,sayes he did't know he had to.
so,here i am, with this live round stuck in chamber. the barrel chamber end is now sitting in a jar of kroil. think i might try tapping the bullet{hp} back into case to let oil kill powder then drive out.
first time with this problem,so i have a high pucker factor.
open to all suggestions
thank you-
emmie