Beren
Moderator Emeritus
Does anyone have advise for repairing a rusty S&W 910? It does seem to be in repairable condition, after soaking it in oil to get the slide and action loose. I've used oil and steel wool to brush out rust spots on the slide, and the slide itself is slightly pitted.
The safety is difficult to operate.
The extractor is sealed to the slide with rust between them.
The frame seems okay, but I'll need to take apart the action to be sure.
The barrel is spotless.
Does anyone have a service manual available for the 910?
The safety is difficult to operate.
The extractor is sealed to the slide with rust between them.
The frame seems okay, but I'll need to take apart the action to be sure.
The barrel is spotless.
Does anyone have a service manual available for the 910?