rossi .22 pump acton modle 62

[MARKSMANS8056]

Can Anyone Tell Me Where I Might Find Parts For A Rossi .22 Pump Action Rifle. It Is Not One That Was Imported By Braz Tec. It Was Imported By Garcia, Which Is Out Of Buissiness. Someone Told Me That A Winchester Modle 62a Had Same Parts Can Anyone Verify This. What I Need Is The carrier Or A Complete Carrier Assembly.

 

[rcmodel]

A carrier from an 1890, 1906, 62, or 62A might work, but I don't know that for sure.

I have one of each in complete rifles, and a spare 1906 action for parts, but I would have to tear them apart to do any meaningful measuring.

Used to be a ton of them on Ebay all the time, up until they banned gun parts last month.

Don't know what to tell you about finding one now, other then gunshows.

BTW: What's wrong with the one you have?
The Winchester ones take about 150 years of very hard use to wear one out to where they can't be easily fixed.


rcmodel

 

[MARKSMANS8056]

thank you rcmodel. that's about what i figured out. no one has these parts!

 

[rcmodel]

What's wrong with the one you have?
The Winchester ones take about 150 years of very hard use to wear one out to where they can't be easily fixed.


rcmodel

 

[MARKSMANS8056]

rcmodle,

the top part of the carrier is broken, and it allows the shell to slide over it and ends up behind the carrier. when i disassembled the gun there was a shell there, it was beaten up pretty bad (very dangerous), i don't know how this guy broke it, i agree, it should last forever. i'm still trying to find out if the winchester carrier will work.
thanks,

bryan

 

[rcmodel]

Might try Popperts. It appears they may have them.
Whether or not they will fit or not is another question.
Getting an answer out of them is another question!
http://www.poppertsgunparts.com/cgi-bin/webdata/webdata_gunparts.cgi

Also, contact Two Ponies.
He is the go-to guy on old Winchester pumps when all else fails!
He very may well know if a Winchester carrier will fit your Garcia-Rossi 62.
He is great to deal with!

http://twoponies.home.mindspring.com/gunparts.htm


rcmodel

 

[Sistema1927]

One of the reasons why the 1890/06/62 series are so expensive was due to the fact that they needed a considerable amount of hand fitting.

I imagine that Taurus/Rossi still do the same, just with lower manpower costs, and that the repair of this rifle is going to be a bit pricey.

 

[MARKSMANS8056]

Thank You Rcmodle,

I Was Able To Find The Part At A Local Gunsmith's Shop. He Just Gave Me A Stripped Down Carrier.

Thanks For All Of Your Help. I Copied Two Ponies Address For Uture Parts Needs.,

Thanks
Bryan

 

[rcmodel]

Well, did it fit or not?

Inquiring minds want to know!


rcmodel

 

[MARKSMANS8056]

Rc Model,

Yes The Part Did Work, But It Was From The Same Gun. So I Still Don't Know If The Winchester Part Would Have Worked. I'm Just Glad To Get It Out Working Good. The Part Was "free". I Made $65.00 To Install And Clean Gun.

Thanks
Bryan