greyling22
Member
I've got an old rossi/interarms m92 in 357, and the throw is ok up until the last couple inches closing the action. the part where the locking lugs slide up behind the bolt and lock everything into place. That part is very stiff and ruins an otherwise decent gun. I hear all about how the 92 action is so slick, but this one is not so.
I was reading here http://marauder.homestead.com/files/Rossitune.htm about how it is probably the ejector spring that is causing the problems. Does anybody have any experience with a 92 action job? is the link correct that the ejector spring could be causing the issues? is the steves spring linked on the marauder page any good? is there another solution?
I'm pretty good working on marlins's but I'm new to the 92 action.
I was reading here http://marauder.homestead.com/files/Rossitune.htm about how it is probably the ejector spring that is causing the problems. Does anybody have any experience with a 92 action job? is the link correct that the ejector spring could be causing the issues? is the steves spring linked on the marauder page any good? is there another solution?
I'm pretty good working on marlins's but I'm new to the 92 action.