Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rossi R92 in 357 magazine follower replacement

Discussion in 'Rifle Country' started by hardheart, Oct 3, 2012.

Thread Status:
Not open for further replies.
  1. hardheart

    hardheart Member

    Joined:
    Apr 15, 2004
    Messages:
    157
    I followed a bit of info from here http://www.leverguns.com/articles/taylor/rossi.htm

    But it doesn't quite work. It is smaller on the inside, and I was able to thread the spring in, but it is also smaller on the outside. The follower came out of the tube and was sitting above the carrier after I ejected the 10th round while testing operation immediately after installing. Is there something I can do to use this metal follower (wrap the base in something to increase diameter?), or do I need to toss it and order one from steve's gunz.
     
  2. Badlander

    Badlander Member

    Joined:
    Mar 14, 2008
    Messages:
    1,051
    Location:
    South Florida
    Toss it! Get one that works.
     
  3. hardheart

    hardheart Member

    Joined:
    Apr 15, 2004
    Messages:
    157
    I ordered from the Smith shop instead of Steve's. Massive price & shipping difference.
     
Thread Status:
Not open for further replies.

Share This Page