Ruger P94 Trigger Bar Spring

[Coyote3855]

I picked up a beater P94 for a truck gun. Cleaned it up, replaced recoil spring and mag springs. Found some rust on the trigger bar spring. I need instructions on how to remove it and replace with a new one. Schematics show the part, but I can't find directions. Seems like the back end should just pop off the pin, but I didn't want to force it and can't see what the muzzle end is connected to.

Thanks for any assistance.

 

[WardenWolf]

Ruger's website is your friend. They have manuals available for pretty much every gun they've ever made.

https://ruger-docs.s3.amazonaws.com/_manuals/pSeries.pdf

 

[Coyote3855]

Been there, done that.

Not friendly enough to describe dis-assembly except basic field strip. Past that, the manual says return to factory. I may try Brownell's Customer Service. They have the spring, for $1.50.

 

[Fremmer]

Did you try numrich gun parts, they might have a shop manual or book that can help.

 

[Coyote3855]

Found what I needed on the Ruger forum.