Kahr carrier
Member
If Ruger had a performance center ,What gun would you like to see made or modifyed ??
Ruger Performance Center
- Thread starter Kahr carrier
- Start date
- Status
KelBench400
Member
How about a 4" 7-shot .357 Redhawk?
10-Ring
Member
IMHO, the only thing lacking in their revolvers is a nicer trigger. If there were a Ruger PC, I'd be interested in a Super Redhawk w/a tuned trigger....hmmmm
seeker_two
Member
3" GP-100 in .44SPL & .45ACP (5-shot cylinder).
3" SP-101 in .22MAG (7-shot cylinder) & .32MAG w/ alloy frame (same as autos).
Super Blackhawk Hunter in .480 Ruger, .454 Casull, & .500 S&W Magnum w/ 5-shot cylinders.
An ACCURATE Mini-14/30.
Model 96 leverguns in .357, .41, & .480
Anything in titanium...
UPDATE: Mark II in .22 Magnum...
3" SP-101 in .22MAG (7-shot cylinder) & .32MAG w/ alloy frame (same as autos).
Super Blackhawk Hunter in .480 Ruger, .454 Casull, & .500 S&W Magnum w/ 5-shot cylinders.
An ACCURATE Mini-14/30.
Model 96 leverguns in .357, .41, & .480
Anything in titanium...
UPDATE: Mark II in .22 Magnum...
Last edited:
Bisley Hunter in .454 Casull/.45 Colt, and also comes with a .45 ACP cylinder. Wouldn't that be cool?
ss Redhawk 357 magnum, 5" barrel.
ss GP 100 7.5" barrel .357 maggie
ss GP 100 5" barrel, .22 LR
ss Redhawk 41 maggie, 5" barrel
ss .22 maggie sp 101, 3" barrel (6-shot)
ss GP 100 .357 magnum 5" barrel , 7-shot.
PC 45 carbine
Come out with a NEW semi-auto rifle design, and chamber it in .243 Win.
ss Redhawk 357 magnum, 5" barrel.
ss GP 100 7.5" barrel .357 maggie
ss GP 100 5" barrel, .22 LR
ss Redhawk 41 maggie, 5" barrel
ss .22 maggie sp 101, 3" barrel (6-shot)
ss GP 100 .357 magnum 5" barrel , 7-shot.
PC 45 carbine
Come out with a NEW semi-auto rifle design, and chamber it in .243 Win.
Wil Terry
Member
William B. Ruger SR stated several times over the years
He was not interested in having any kind of " custom shop ".
His reasoning was there were many fine pistolsmiths out in the hinterlands who could do the finest of work and he was not about to take that work away from them.
He was not interested in having any kind of " custom shop ".
His reasoning was there were many fine pistolsmiths out in the hinterlands who could do the finest of work and he was not about to take that work away from them.
The Mighty Beagle
Member
- Joined
- Dec 30, 2002
- Messages
- 218
Maybe they could produce stainless guns WITHOUT sharp edges you can shave with. Or maybe they make blued Mark II’s that are actually blued instead of PAINTED.
Don’t take me as a Ruger basher, I use many of their firearms. But they sure put out some roughly finished guns.
Don’t take me as a Ruger basher, I use many of their firearms. But they sure put out some roughly finished guns.
TheFrontRange
Member
- Joined
- Jan 17, 2003
- Messages
- 544
I'd love to see Ruger produce a compact, single-column mag 9mm along the lines of the S&W Model 908, et.al...maybe a down-sized P95-type pistol. For that matter, I guess they could do the same thing in .40 and/or .45ACP, too.
Kahr carrier
Member
I would like to see a 44 Redhawk snubbie Magnaported and a 4 inch Redhawk 454 Cassull also Magnaported.
10-Ring
Member
I had this thought earlier today...a 5 shot sp-101 w/ bobbed hammer in 45 acp. , a 10 shot GP 100 in 22lr and a 10/22 w/ machined parts and tunable trigger....now you're talkin
Omaha-BeenGlockin
Member
How about a Mini-14/XGI MKII in .308---.243--.260---7-08 priced at about $800-$850---to beat the pants off Springfields' overpriced offerings.
Such a move would probably put SA out of business---or force them to be competitive.
Competition is a good thing.
Such a move would probably put SA out of business---or force them to be competitive.
Competition is a good thing.
Carbon_15
Member
Where can I sign up...I'll take one Stainless .308 please.
A slicked up, lightened, and engraved version of the Vaquero would be nice. And how about an accurized, CC version of the polymer framed autos with a shorter barrel and grip.
JohnK
Member
Super Redhawk with the frame extension milled off and a Redhawk barrel installed, and a 4" version offered.
A 5 or 6 shot 41 Mag GP100. A six shot is likely impossible but some Pythons were converted to 6 shot 41's so maybe it's possible with the GP.
A 6 shot 10 mm GP100 with full moon clips.
A 5 shot 45 Colt GP100 with all the current barrel length and sight options.
The Security Six/Speed Six line brought back!
A 5 or 6 shot 41 Mag GP100. A six shot is likely impossible but some Pythons were converted to 6 shot 41's so maybe it's possible with the GP.
A 6 shot 10 mm GP100 with full moon clips.
A 5 shot 45 Colt GP100 with all the current barrel length and sight options.
The Security Six/Speed Six line brought back!
Last edited:
JMLV
Member
Since Ruger makes it a practice to
UNCUSTOMIZE every one of its guns that comes their way for repairs(Or as they say "return to factory spec's)I would say they already have an UNCUSTOMIZE SHOP on the premisis.
UNCUSTOMIZE every one of its guns that comes their way for repairs(Or as they say "return to factory spec's)I would say they already have an UNCUSTOMIZE SHOP on the premisis.
Kor
Member
I'll second the motion on the Speed-Six, preferably with the SP101-style grip stud and grips!
Actually, what I'd REALLY love to see would be a re-introduced Security-Six, in 9mm, with high-profile target-type or Ashley-type rear sight and gold bead/Hi-Viz front ramp sight - I can't help but think THAT would be the ULTIMATE IDPA REVOLVER.
If they don't want to resurrect the tooling for a Security-Six, I could be satisfied with a GP100 that shoots 6 moon-clipped rounds of 10mm Auto, or .38Super - or possibly a 7-8 shot moon-clipped .30Carbine...
Actually, what I'd REALLY love to see would be a re-introduced Security-Six, in 9mm, with high-profile target-type or Ashley-type rear sight and gold bead/Hi-Viz front ramp sight - I can't help but think THAT would be the ULTIMATE IDPA REVOLVER.
If they don't want to resurrect the tooling for a Security-Six, I could be satisfied with a GP100 that shoots 6 moon-clipped rounds of 10mm Auto, or .38Super - or possibly a 7-8 shot moon-clipped .30Carbine...
denfoote
Member
Whaddya mean, Ruger custom shop???!!
Ruger don't need no stink'in custom shop!!!
Perfection right out of the box!!!
Whatddya think they are, 1911's!!!!
Ruger don't need no stink'in custom shop!!!
Perfection right out of the box!!!
Whatddya think they are, 1911's!!!!
Let's see...
A left handed M77 in .308/7-08/.260, and a left handed 77/22;
An adjustable sighted P90.
In revolvers, I saw something neat in the pictures from the shot show posted over on www.gunblast.com ; a GP-100 in the "target grey" finish like on the .454 and .480 SRHKs. It is a special run from a distributor.
A left handed M77 in .308/7-08/.260, and a left handed 77/22;
An adjustable sighted P90.
In revolvers, I saw something neat in the pictures from the shot show posted over on www.gunblast.com ; a GP-100 in the "target grey" finish like on the .454 and .480 SRHKs. It is a special run from a distributor.
cratz2
Member
seeker_two has both of my ideas covered: A 3" 44 Special GP100 with fixed sights and a Super Blackhawk Hunter in 454. I'd buy both of those.
For rifles, a 77VT in 6.5x284.
For rifles, a 77VT in 6.5x284.
cratz2
Member
Just looked on the gunblast.com page This is pretty neat - a Bisley-based Hunter. I'd buy one in 44 Magnum and one in 454.
Joe Demko
Member
How about a MkII that has a decent trigger?
- Status
