I really don't know how to say for sure. The last one I saw choke and "DNF" a match was a week and a half ago at my monthly club match.
Just out of curiosity - what type of malfunction are you seeing there? I've heard of some issues with the extractor and 9mm, but that doesn't seem like the type of thing that would take a pistol of a match for the rest of the day.
FWIW, mine has been mostly pretty good. Most of my issues were self caused, and break down to:
1. I went to a lower power recoil spring (13 lbs) that it discovered didn't have the power to always overcome the striker spring and close the action, resulting in "no bang" when the trigger was pulled occasionally. Going back to the stock spring completely fixed that issue, so I can't fault the gun.
2. I've had extraction issues only if I go for a good while (750 rounds or so if shooting lead - about twice that if shooting jacketed) without at least taking a pick to the extractor and scrapping out the crud.
3. Only within the last month or two I've had a few times where empty brass stuck in the chamber and wouldn't come out without using a squib rod to bang it out. I was using bulk used brass though and after I started to case gauge I've found several instances of 9mm Luger cases in that batch that someone cut down to 9mm Makarov length. I've got a hunch that these were causing problems as when I case gauged the lot and removed those all the issues went away.
Certainly no worse than any other pistol I own - issues caused by lack of cleaning, tinkering, and bad reloads, which will stop anything. I keep a round count of what I put through the gun and I just passed 10k rounds this month.
Granted, as I mentioned earlier I think highly of a lot of other guns too. I've owned or shot most of the "major" duty sized pistols on the market right now and the only one that I just don't really like is the Beretta 92, and even that one isn't terrible. As long as you stay away from the absolute cheap junk guns (Lorcin, Jennings, etc) they all pretty much work fine.