First post guys. I just picked up a 14-3 6". IF I let off the trigger slowly, it doesn't reset. The sear is not going back over the trigger unless you let the trigger off fast OR if you let it rest slowly, you have to push the trigger forward just a TINY bit OR pull the trigger back a TINY bit. I am attaching 2 pics of the sear/trigger interface when i let the trigger reset slowly.
this is the sear not resetting.
after I push trigger forward a TINY bit. you can see the slightly smaller gap near where the trigger stop would be. I removed it to make sure it wasn't causing the issue. SO....new sear? new sear spring? new rebound slide spring? Sorry for all the oil, i was cleaning the pistol. THANKS GUYS!!
this is the sear not resetting.
after I push trigger forward a TINY bit. you can see the slightly smaller gap near where the trigger stop would be. I removed it to make sure it wasn't causing the issue. SO....new sear? new sear spring? new rebound slide spring? Sorry for all the oil, i was cleaning the pistol. THANKS GUYS!!
Last edited by a moderator: