kennedy762
Member
Here's my situation: I recently got a Savage 110 BA, ordered a Nightforce 8-32X54 NXS and nightforce rings. Since I often do more research AFTER I buy something I learned the elevation limitations of this scope. The 110 BA comes with a 20 MOA base (along with the copious amount of rail that comes with it) and was wondering about putting in a shim if I needed more elevation out past 1000 meters. I saw snipers in Iraq cut a small piece of water bottle and put it between the scope and the rear ring to get more elevation. I am thinking, that since this will put stress on the maintube of the scope, what I would do is take the monsterous rail system off the gun and place a plastic shim under the mount toward the rear and screw the it back on. This would give me another 20 MOA (rough guess) of elevation right???
I have yet to shoot this beast, and am working on putting together some rounds (Lapua brass, 300gr Berger hybrids, Retumbo, Federal Gold Match primer) but this scope issue is bugging me. I should have gone with the 5.5-22X50 :banghead: but there is no going back now. The thought of having a 32 power scope was more enticing at the time....
I have yet to shoot this beast, and am working on putting together some rounds (Lapua brass, 300gr Berger hybrids, Retumbo, Federal Gold Match primer) but this scope issue is bugging me. I should have gone with the 5.5-22X50 :banghead: but there is no going back now. The thought of having a 32 power scope was more enticing at the time....