Savage 99 is it worth having it reblued

Status
Not open for further replies.

horsemen61

Member
Joined
Oct 20, 2011
Messages
6,796
Ok guys so I recently picked up a savage model 99 in 300 savage and while I know rebluing it will kill the collector value it is a common model that has little value to begin with now I have heard that the it is a hard steel and doesn't take bluing well so A would you do it and B if yes who would you have do it
 
Ok guys so I recently picked up a savage model 99 in 300 savage and while I know rebluing it will kill the collector value it is a common model that has little value to begin with now I have heard that the it is a hard steel and doesn't take bluing well so A would you do it and B if yes who would you have do it
Assuming we are talking more than just minor wear of the blueing, tf you are buying it as a "using" gun that you plan to hunt with for years and maybe pass on to a son or daughter one day, then for (A), yes I would have it reblued.

I can't help you with (B) as I have never had a gun reblued professionally.
 
Thank you mike for your input yes a rather large amount of bluing is missing and I would like to hunt with this gun so I am reconsidering having it done and yes pass it on to one of my kids if I have one is the plan
 
There is nothing particularly difficult about re-bluing a Savage Model 99.

Maybe you are thinking of 'Mystery Metal' Post 64 Winchester 94's?

rc
 
The "mystery metal" briefly of the post '64 Winchester 94's was malleable iron (not to be confused with cast iron) which tends to blue reddish purple - not very attractive.
 
Had mine reblued and it turned out great. I also refinished the stock and forend. The gun was my grandfathers and will be passed down to my son so I could care less about value....its priceless to me.
 
And make absolutely positively sure they know how to properly polish it for bluing.

The flat sided receiver begs to be hand prepped & polished, and not stuck against a high-speed buffer wheel.

And a Weatherby type, diamond in a goats azz high polish bluing job is also definitely Out!

rc
 
I had an old Winchester 74 reblued and it did not turn it well. It is a mottled brownish blue.
The gunsmith did a hot blue. Maybe it should be redone but I don't know.
 
No, I didn't say that.

I meant to convey that a high polish 'Black Chrome' buffing job is out of place on your vintage rifle.

The factory finish was not shiny, just a nice gloss blue.
But neither was it Matt dull either.

Fords #400 grit polish would be comparable to what it had when new.

The #555 Master polish would be comparable to a mirror finish, and would be completely out of place on a Savage 99 if you want it to look like it did when it was made.

Here's the link again.
http://fordsguns.com/index2-2.htm

If you call them and tell them you want it to look just like new again?
That's what they will do for you.

rc
 
Maybe Ceracote

I had some old family heirlooms that were left in the closet in Florida too long and they were pitted and nasty. I had them cerakoted with a dark blue black color and they look wonderful. Might be an option if the metal is pitted
 
Status
Not open for further replies.
Back
Top