For my high school senior project, I chose "Modern Shouldered Small Arms Design and Development" ans a research topic. In addition to a research paper, I'm required to make a producr representing what I've learned. I'm going to build a 1:1 scale cutaway model of my own rifle design. I like the 7.62x25mm round, so pps-43 mags would work for this build. Anyone have suggestions or would like to make a parts donation?
thanks, Josh
BTW: the school district has already OK'd my idea
Parts List:
AK torched barrel stub
pps-43 mags
sten recoil springs
pps43 bolt (for measuring feed lips) *a detailed measured drawing of the bolt would also work*
small parts like springs, pins, and internals
non- us made fcgs (triggers make cool bolt handles)
7.62x25 dummy rounds or just spent brass
non- us made grips (to pattern my own)
other stuff that'd be useful that I can't think of
thanks, Josh
BTW: the school district has already OK'd my idea
Parts List:
AK torched barrel stub
pps-43 mags
sten recoil springs
pps43 bolt (for measuring feed lips) *a detailed measured drawing of the bolt would also work*
small parts like springs, pins, and internals
non- us made fcgs (triggers make cool bolt handles)
7.62x25 dummy rounds or just spent brass
non- us made grips (to pattern my own)
other stuff that'd be useful that I can't think of
