Should I trade my 26 for a SP101

Status
Not open for further replies.
C

camsdaddy

Member
Joined
Aug 12, 2007
Messages
744
Location
Georgia
I recently bought a Glock 26 I have 150-200 rounds through it. I like its concealabilty, capacity and cool factor I guess. I just cant get the hang of it and get it to shoot well. I am consistanly low. I have dry fired it I have read ways to improve its just not working for me. My question is I have a 4 k frame that I shoot well. I am wondering if maybe I should trade my 26 for a 3" sp101. I guess I just shoot revolvers a little better and would like to add ct grips. If I do trade what would be a good trade. It still has the orange stuff in it but I know its used.
 
I did, and haven't looked back. Half the capacity, but IME easier to conceal, more accurate, and more power. Which ever one you shoot best, keep it.

Just my .02,
LeonCarr
 
Sometimes you just go with what you know...

An SP101 would be a fine cc piece. But if I may suggest: if you have a 4" k-frame that you shoot well, then I would suggest sticking with the same platform that IS working for you. For carrying get a 2.5" round butt k-frame. It will be slightly easier to conceal than a 3" SP101, but more importantly will let you use the knowledge and comfort level you have with the K-frame already. I carry a 6-shot 2.5" 19 sometimes (and my other 1/2 is at the range at this very moment with her 2.5" 66!). I find the 2.5" as accurate and pleasant to shoot as a 4".

Excellent condition pre-lock model 19 (blue/nickel) or 66 (stainless) guns like that go for $400 to $500, sometimes cheaper if you are in the right place at the right time. A 2.5" model 686 is only slightly larger. It would not use the same round speedloaders as your other K frame, if that is a consideration.

I agree with LeonCarr, I do not feel "undergunned" with six rounds of .357 on tap in a cc piece!
 
Me neither. I carry a .357 with 6 rounds + 2 speed loaders on my belt, when I carry. An SP101 would be a bit easier to conceal than my GP100, but I shoot the GP100 better anyway. It fits my hand well, even with the stock grip. For waist carry, I really need a semi-auto, preferably in .45 ACP. I use a shoulder rig with the Ruger revolver.
 
Low ?

Transition from a revolver to an auto can be difficult for some people.
The Glock 26 is a fine weapon,and sometimes it takes awhile to get use to a smaller grip,especially if you have large hands,such as I do.
I own many handguns,and several Glocks.When I shot my first model 27 Glock,it was difficult for me to get a comfortable grip.Not because of recoil,because it was mild to me.Just the shorter grip.After some practice,I learned how to grip the smaller weapon,and eventually got use to it.

As far as the shooting low ,it could be from an improper grip you have in grasping the weapon when you fire,or it could actually be the ammo itself.

If you like the Glock,try one of the extended floor plates that add an extra
groove for you pinkie finger to rest on,and a little bit of practice.If after that,you still feel uncomfortable,then go for what you feel comfortable with.

Confidence,and comfort in your weapon is very important to shot placement,and survival .

Doc
 
When you say you shoot your K frame better, is that double or single action?

It seems that a lot of folks that say they're "good" with a revolver are only shooting it single action.

The 26 would be my pick, along with a gun class.
 
No, don't get rid of it. You just have some work to do.

Massad Ayoob describes how to shoot the G26. One trick is to curl your pinky finger under the baseplate of the 10 round magazine. Grip the gun very tightly with the firing hand.
 
Why don't you hire an instructor to figure out your problem with the glock. Just because you can't shoot it now doesn't mean you can't be taught to shoot it.
And by the way I just put a set of CT on my 26 for $180.00 delivered. Even more cool factor.
 
Hey, The mini Glocks are fairly accurate and have a good rep. An old Marine instructor said if you are getting groups, adjust your sights to hit the bullseye. Do you have a good group or is it a shotgun pattern? If you have a good group, get a lower front sight and it will raise the group, If you have a shotgun pattern, either spend a bunch of time dryfiring and training or sell the gun and buy what works now.

You might also look at the S&W 60 or 36 to have a consistent trigger over your range of guns.
A Ruger SP-101 is a great gun, just seems heavy for its size.
 
Glocks are very reliable and durable guns.

That said, we all have our preferences. While I am not a Ruger guy the SP101 is a great midsize. .357 is a great round.

I do admit that my opinion of Ruger is tainted. I find it repugnant that a brand new gun needs work. Most people immediately install a Wolf Spring Kit. (Why would Ruger not do a better job with the trigger?)

If you are going to make the switch I like Senor Williams suggestion of a used Smith 60 or 36. Great guns, nice triggers.

Of course I would suggest that you get some more rounds through your Glock before you decide. You haven't developed a relationship with her yet because you only have a couple of hundred rounds through her. Yall are still dating. Wait until you have a thousand through her, then decide if she is a keeper.
 
sp101's aren't too bad on the price. i have one, bought it used and was under $300.00

the little 26 should be quite good. lots of people rave about them. maybe you need a little time to get used to it.
 
Everytime you sell a Glock, somewhere a german will cry.



In all seriousness why not check out a S&W M&P Compact? I've recently fondled a couple in 9 and it fits my hand perfectly (and i have largeish hands). As was previously mentioned it might be better to stay with the same platform.
 
I can shoot my glock 33 (same gun as G26, but in .357 sig) much better than I can any small revolver in double action mode. In single action with good sights the revolver is more accurate. For combat revolvers are normally fired in the DA mode. The g26 mag holds 10 rounds and most K frames hold 6 and most J frames hold 5. I can reload the auto a little faster, but if you know how to use speed loaders the revolver is pretty quick also.
 
Fortunately, I bought a G-19 -- great pistol. I would not consider trading it for an SP-101 and I like SP-101's.
 
Would you bet your life on the Glock? If not, then sell it. The SP101 is a fine gun and has served me well in CC.
 
David E:

When you say you shoot your K frame better, is that double or single action?

It seems that a lot of folks that say they're "good" with a revolver are only shooting it single action.

The 26 would be my pick, along with a gun class.
Click to expand...

Exactly my thoughts! IME, anybody can shoot a DA revolver well in SA mode. The trick seems to be shooting them well in DA mode.

I'd stick with the Glock myself. Oh wait, I DO have one! I actually "replaced" a K-T PF-9 with the Glock. A little harder to carry, but infinitely easier to shoot well with, and leagues ahead in durability.

Somewhere on one of these forums I once read something to the effect of: In pocket (small) guns, 6 rounds is > 5 rounds, and 7-8 rounds is much greater than 6, and the 10 +1 in the Glock 26 is many times greater than 6 in a snub-nosed revolver.

Besides, 150-200 rounds for the Glock is just a good day at the range. You need to shoot it more! :p
 
Good point on more trigger time. Speaking of triggers, do you shoot your G-26 with a short reset, or are you letting it completely reset following each shot?
 
Status
Not open for further replies.

Similar threads

T
  • Locked
Should I trade my glock 26 for a s&w j fram 642?
2 3
Replies
71
Views
4K
Gordon
Gordon
G
  • Locked
Glock 26 vs. Ruger Sp101 - an initial impression
2
Replies
39
Views
5K
Big Mike
B
M
  • Locked
Glock 26 or Ruger Sp101
2
Replies
29
Views
2K
hydraulicman
H
C
  • Locked
The never ending journey to the perfect CCW.
2
Replies
39
Views
3K
guyfromohio
guyfromohio
D
  • Locked
Which do you think is the better defensive handgun...G26 or SP101
2
Replies
45
Views
2K
Doug S
D
Back
Top