Finally picked up a SP01 Shadow .
neat gun..from the box..gun came with 3 mags, usual paperwork, lock, loader, etc. gun was dripping with the usual CZ oil. no real surprises.
the Shadow already has a FO front sight, bigger rear sight, CZ85C trigger, rubber grips. on my scale..the DA pull was very smooth, but off my pull scale for weight..so it was over 8# and the SA was crisp with no camming at 3.25#.
the hammer hooks on the Shadow are much shorter than the std CZ guns..so the single action pull was very clean. the hammer is not narrowed so is a little heavier..also there is no Firing Pin Block in the gun..so that helps the mechanics a little also..
OK..never one to leave things alone..
changed out the front sight to a plain black, change out the grips to flat aluminum, installed a CZ comp hammer, installed a SS FLGR, tweaked the trigger spring, and worked over 15# hammer spring. boosted the hammer and sear.
Trigger now is a nice 6# DA, 2# SA.
have run only about 400 rounds through it of mixed factory and reloads with no problems..used the factory mags and the new MecGar AFC mags..
neat gun..from the box..gun came with 3 mags, usual paperwork, lock, loader, etc. gun was dripping with the usual CZ oil. no real surprises.
the Shadow already has a FO front sight, bigger rear sight, CZ85C trigger, rubber grips. on my scale..the DA pull was very smooth, but off my pull scale for weight..so it was over 8# and the SA was crisp with no camming at 3.25#.
the hammer hooks on the Shadow are much shorter than the std CZ guns..so the single action pull was very clean. the hammer is not narrowed so is a little heavier..also there is no Firing Pin Block in the gun..so that helps the mechanics a little also..
OK..never one to leave things alone..
changed out the front sight to a plain black, change out the grips to flat aluminum, installed a CZ comp hammer, installed a SS FLGR, tweaked the trigger spring, and worked over 15# hammer spring. boosted the hammer and sear.
Trigger now is a nice 6# DA, 2# SA.
have run only about 400 rounds through it of mixed factory and reloads with no problems..used the factory mags and the new MecGar AFC mags..