CharliesHammer
Member
- Joined
- Aug 26, 2019
- Messages
- 363
Pretty new to reloading and have been using 231 and Unique for 9mm. During this shutdown I figured I'd try some new to me powders. Any advice for using SP and guidance would be appreciated.
Been through 1 keg. Just cracked open a 2nd.
Here is a link to their load data:
http://www.alliantpowder.com/products/powder/sport-pistol.as
I've been running 115 and 124 Matchwinners at/near max published loads
Still testing it in my Glock 26 build but Initial results seem that it favors 4.1grs at 1.120”. (Velocity avg. 1003fps, SD 8fps and ES blow 20fps) Will also be testing this load in my 19 to see if it works well for both guns.
Will keep you updated! Might be a little bit I’m running low on my RMR 124gr MW and need to add more.I'd be curious how your testing with the 26 shakes out. One of my problems is I'm trying to develop a 9mm load for shorter barrels... 3.6" and 3.1" respectively, in my Kahrs. My tests with BE-86 did not turn out well, particularly in the shorter (CM9) barrel... I think the burn rate of BE-86 is just too slow. I'm going to try it again with SportPistol, but almost everyone is using it in longer barrels.
try some WSF