awwhite1012
Member
Does any one know how to disassemble a sterling 300 or know where to find the information?
Sterling .25
- Thread starter awwhite1012
- Start date
- Status
Dravur
Member
I looked
Could not find anything on the net...
But I would use a sledgehammer or a hand grenade.
Could not find anything on the net...
But I would use a sledgehammer or a hand grenade.
awwhite1012
Member
Yeah thats the same problem ive been having the only thing I found claiming to know the steps made it sound the same steps as taking apart a raven .25 but didnt work.
DrLaw
Member
Sterling disassembly
Make sure the chamber is empty. Remove the magazine. Pull the trigger to let the striker go forward. There is a button on the rear left of the gun. Push that in. This will release the breachblock. It should come backwards. Now pull the slide slightly backward and lift. It should come off the frame. Let it go forward. It will come off the barrel. This is as far as you go in disassembly without taking pin punches to it. The barrel is not removable.
The Doc is out now.
Make sure the chamber is empty. Remove the magazine. Pull the trigger to let the striker go forward. There is a button on the rear left of the gun. Push that in. This will release the breachblock. It should come backwards. Now pull the slide slightly backward and lift. It should come off the frame. Let it go forward. It will come off the barrel. This is as far as you go in disassembly without taking pin punches to it. The barrel is not removable.
The Doc is out now.
awwhite1012
Member
Worked like a charm once i used a screwdriver to push the nondecript button on the pos thanks
- Status