Thank You THR - Pay it Forward

Status
Not open for further replies.
BDS
please add me Artofgolf: 50 Berry's plated 147g RN - End date 2/22/15

Never tried 147s in 9mm.



Contrib member, MBC purchase

Thanks Artofgolf for putting the bullets up for PIF.
 
To participate in this PIF thread, do at least one of the following:
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272


Dudedog, Done!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 2/15/15

Dudedog: Hogue Rubber grips for Sig P226 (#26001 OD green) - End date 2/15/15

BoltLover: 5 cable type gun locks - End date 2/15/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 2/15/15

MikeS.: small electronic scale - End date 2/15/15
jell-dog - Contributing member
notaglockfanboy - PIF contributor

Walkalong: 100 X-Treme plated 308 150 gr FP (.308" dia) - End date 2/15/15

Walkalong: 100 X-Treme plated 7.62X39 123 gr FP (.312" dia) - End date 2/15/15
- BoltLover - Contributing member

Walkalong: 100 X-Treme plated 7.62X39 123 gr FP (.312" dia) - End date 2/15/15

Artofgolf: 50 Berry's plated 147g RN - End date 2/22/15
- allaroundhunter - PIF contributor
- Dudedog - Contributing member
 
Last edited:
BDS,
Please add me for Walkalong: 100 X-Treme plated 308 150 gr FP (.308" dia) - End date 2/15/15.
Contributing Member

Sorry - Please cancel that. I don't think they will work for my application, looks like I would need to keep them under 1500 fps.
I would be loading with H335 and should be about 2500 fps.

They don't appear to be made for .308 Winchester.
 
Last edited:
To participate in this PIF thread, do the following (blarby, rcmodel or I will pick the random winners on Sundays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

I forgot about the Sunday drawing! :banghead: It was too short of notice for blarby/rcmodel to pick the winner so had my wife flip a coin.

Congratulations BoltLover! PM Walkalong for 100 X-Treme plated 7.62X39 123 gr FP bullets.

Congratulations jell-dog! PM MikeS for the electronic scale.

Unclaimed items reset for Sunday, 2/22/15.

Thanks to those who posted items!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 2/22/15

Dudedog: Hogue Rubber grips for Sig P226 (#26001 OD green) - End date 2/22/15

BoltLover: 5 cable type gun locks - End date 2/22/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 2/22/15

Walkalong: 100 X-Treme plated 308 150 gr FP (.308" dia) - End date 2/22/15

Walkalong: 100 X-Treme plated 7.62X39 123 gr FP (.312" dia) - End date 2/22/15

Artofgolf: 50 Berry's plated 147g RN - End date 2/22/15
- allaroundhunter - PIF contributor
- Dudedog - Contributing member
 
To participate in this PIF thread, do the following (blarby, rcmodel or I will pick the random winners on Sundays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

clearcut, Done!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 2/22/15

Dudedog: Hogue Rubber grips for Sig P226 (#26001 OD green) - End date 2/22/15

BoltLover: 5 cable type gun locks - End date 2/22/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 2/22/15

Walkalong: 100 X-Treme plated 308 150 gr FP (.308" dia) - End date 2/22/15

Walkalong: 100 X-Treme plated 7.62X39 123 gr FP (.312" dia) - End date 2/22/15
- clearcut - PIF contributor

Artofgolf: 50 Berry's plated 147g RN - End date 2/22/15
- allaroundhunter - PIF contributor
- Dudedog - Contributing member
 
I was a PIF contributor this month... does that make me eligible for:

Walkalong: 100 X-Treme plated 308 150 gr FP (.308" dia) - End date 2/22/15

Thanks =)
 
To participate in this PIF thread, do the following (blarby, rcmodel or I will pick the random winners on Sundays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

ThePenguinKnight/Poper, Done!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 2/22/15

Dudedog: Hogue Rubber grips for Sig P226 (#26001 OD green) - End date 2/22/15
- Poper - Purchase from OpticsPlanet 2/11/15

BoltLover: 5 cable type gun locks - End date 2/22/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 2/22/15

Walkalong: 100 X-Treme plated 308 150 gr FP (.308" dia) - End date 2/22/15
- ThePenguinKnight - PIF contributor

Walkalong: 100 X-Treme plated 7.62X39 123 gr FP (.312" dia) - End date 2/22/15
- clearcut - PIF contributor

Artofgolf: 50 Berry's plated 147g RN - End date 2/22/15
- allaroundhunter - PIF contributor
- Dudedog - Contributing member
 
Poper,
I will take you word for it.:)

Just curious, what di you pick up from them? Good price? Easy to deal with?
 
Congratulations Poper! PM Dudedog for Hogue Rubber grips for Sig P226.

Congratulations ThePenguinKnight! PM Walkalong for 100 X-Treme plated 308 150 gr FP.

Congratulations clearcut! PM Walkalong for 100 X-Treme plated 7.62X39 123 gr FP.

Congratulations allaroundhunter! PM Artofgolf for 50 Berry's plated 147g RN.

Unclaimed items reset for Sunday, 3/1/15.

Thanks to all those who posted items!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 3/1/15

BoltLover: 5 cable type gun locks - End date 3/1/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 3/1/15
 
To participate in this PIF thread, do the following (blarby, rcmodel or I will pick the random winners on Sundays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Artofgolf, Thanks!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 3/1/15

BoltLover: 5 cable type gun locks - End date 3/1/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 3/1/15

Artofgolf: 50 9mm X-treme 147g HP plated - End date 3/22/15
 
To participate in this PIF thread, do the following (blarby, rcmodel or I will pick the random winners on Sundays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Dudedog, Done!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 3/1/15

BoltLover: 5 cable type gun locks - End date 3/1/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 3/1/15

Artofgolf: 50 9mm X-treme 147g HP plated - End date 3/22/15
- Dudedog - Contributing member
 
To participate in this PIF thread, do the following (blarby, rcmodel or I will pick the random winners on Sundays):
- Become a THR Contributing member - http://www.thehighroad.org/payments.php
- Become a PIF contributor in this thread or in blarby's PIF thread - http://www.thehighroad.org/showthread.php?t=698208
- Support a vendor offering THR discount within prior month - http://www.thehighroad.org/showthread.php?t=760272
-------------------------------

Dudedog, Thanks!

Update:

Ditchtiger: 2-3 dozen Gas check material (precut at .540, .005 thick copper 8" long) - End date 3/1/15

BoltLover: 5 cable type gun locks - End date 3/1/15

BoltLover: 2 sets of lee bullet feeder small size feeder fingers - End date 3/1/15

Dudedog: 100 9mm Mak MBC lead 93 gr RN (Sized .365", not a typo they are .365" for 9 Maks) - End date 3/8/15

Dudedog: 100 9mm MBC lead 125 gr CN (Sized .356") and mixed range brass - End data 3/8/15

Artofgolf: 50 9mm X-treme 147 gr HP plated - End date 3/22/15
- Dudedog - Contributing member
 
Status
Not open for further replies.

Similar threads

M
  • Locked
MBC Discount Code Update
Replies
7
Views
2K
MissouriBullet
M
primalmu
  • Locked
Pay It Forward Idea
Replies
13
Views
920
NeuseRvrRat
NeuseRvrRat
longdayjake
  • Locked
5% off coupon only for THR members at Rocky Mountain Reloading
2
Replies
40
Views
21K
bbqreloader
bbqreloader
M
  • Locked
The Linotype is available
Replies
8
Views
938
Maj Dad
Maj Dad
Prowler53
  • Locked
Thank you THR
Replies
1
Views
211
forty_caliber
forty_caliber
Back
Top