velocette
Member
Recently asked for advice on seating HBWC .38 spl bullets for use in my club's PPC competition.
Many folks responded with their results, pressure changes etc.
Finished my first batch of 100 HBWC reloads with the bullet seated just barely below the case mouth and the crimp slightly rolling over the face of the bullet. With a bit more care, they work just fine with my Safariland comp III speedloader less so with HK speedloaders. 2.7 grains of the old standby Bullseye propellant.
Will discover how they shoot tomorrow at my club/
Thanks again for the suggestions, information and advice.
Roger
Many folks responded with their results, pressure changes etc.
Finished my first batch of 100 HBWC reloads with the bullet seated just barely below the case mouth and the crimp slightly rolling over the face of the bullet. With a bit more care, they work just fine with my Safariland comp III speedloader less so with HK speedloaders. 2.7 grains of the old standby Bullseye propellant.
Will discover how they shoot tomorrow at my club/
Thanks again for the suggestions, information and advice.
Roger