Beagle-zebub
Member
An idea popped into my pretty little head today, and I was wondering whether it's feasible.
It is as follows: a Contender carbine, chambered in .45 Colt, and threaded for a .45 acp suppressor. As I'm imagining it, it would fire really heavy .45 bullets (say, 360 grains) at barely subsonic velocities, thus getting more than 700 ft-lbs. of energy while not emitting a supersonic crack. If necessary, a pistol length barrel might be used to keep the velocities subsonic, as might an extra-long Sharps-style barrel.
Is there anything preventing the use of bullets created for the .45 Colt through a suppressor designed around the .45 acp? (Those heavy-duty SMG cans might have a better chance of handling this, and a really long barrel might let pressures down to a suitable level, whatever that is. Twist-rate might be a problem, too, and the Nielsen device would have to go.) Do suppressors require jacketed bullets? (This would make the maximum weight 300 grains, methinks.) Bullets for either round appear to be either .451 (jacketed) or .452 (cast).
As to the question of what nefarious ends this might be used for, in the very unlikely event of its realization, I'm picturing me blasting those fat 15-lb. woodchucks that abound in DE suburbs and adjacent PA; additionally, I'd think that some farmers would be more willing to allow 'chuck hunting on their property if the hunter isn't raising a ballistic clatter and thus the neighbors' hackles.
What say you, gunnies?
It is as follows: a Contender carbine, chambered in .45 Colt, and threaded for a .45 acp suppressor. As I'm imagining it, it would fire really heavy .45 bullets (say, 360 grains) at barely subsonic velocities, thus getting more than 700 ft-lbs. of energy while not emitting a supersonic crack. If necessary, a pistol length barrel might be used to keep the velocities subsonic, as might an extra-long Sharps-style barrel.
Is there anything preventing the use of bullets created for the .45 Colt through a suppressor designed around the .45 acp? (Those heavy-duty SMG cans might have a better chance of handling this, and a really long barrel might let pressures down to a suitable level, whatever that is. Twist-rate might be a problem, too, and the Nielsen device would have to go.) Do suppressors require jacketed bullets? (This would make the maximum weight 300 grains, methinks.) Bullets for either round appear to be either .451 (jacketed) or .452 (cast).
As to the question of what nefarious ends this might be used for, in the very unlikely event of its realization, I'm picturing me blasting those fat 15-lb. woodchucks that abound in DE suburbs and adjacent PA; additionally, I'd think that some farmers would be more willing to allow 'chuck hunting on their property if the hunter isn't raising a ballistic clatter and thus the neighbors' hackles.
What say you, gunnies?