win 94 and williams peep sight problem

[Zepo]

Hey all,

Well i popped out the bull sight on my Winchester 94AE and put a marble 3/8 blank in there. so far so good. when I installed the peep sight which is the correct sight 5D-94se it seems I can't adjust it near its lowest setting without it scraping the breech bolt, any Ideas?

thanks Zepo

 

[Onmilo]

Yep.
Adjust the site to the lowest setting that doesn't interfere with the bolt, then unscrew the little screw on the settings plate and slide the plate to zero, tighten the screw.

Once you get your actual zero, in example, a 100 yard target zero, you can readjust the settings plate to reflect that setting as you actual zero setting. HTH