Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
You are using the old High Contrast theme. We have installed a new dark theme for you, called UI.X. This will work better with the new upgrade of our software. You can select it at the bottom of any page.
How DO you adjust the windage on the WASR-10? I have that weird tool, but I can NOT for the life of me drift it either left and right. Any suggestions?
The windage drum on many AK's is frozen in place by paint and dried lube.
Apply a drop of CLP Breakfree, Kroil, or any good penetrating fluid to the ends of the drum, give the drum a couple of good raps with the butt of a plastic screwdriver and allow to soak overnight.
Try the adjusting tool again.
If it still won't budge, apply a LITTLE heat. DO NOT over heat, just warm it up to allow the fluid to penetrate.
If all else fails, get the front sight support WELL BRACED with wood blocks, and use a brass drift and a light hammer to break it loose.
Be careful to make sure the sight support is properly braced or the front sight can be knocked out of line on the barrel.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.